golf vector images

[Devon Jones]

does anyone have any golf vector images? also if i wanted to inlay a golf ball and golf tee does anyone have any ideas how i would do it i am a little stuck? thanks

[Mike Null]

Devon

What do you want to inlay them in?

[Devon Jones]

well i was thinking wood. instead of having the laser engrave something i can use the ball and tee used to win the tourny into the piece of wood that this cust wants his score cards engraved into. i tried to mess around with the 3d driver and do different levels of black but i would have to engrave like 30 passes for it to go the depth i want. did any of that make sense? im bad with words

[Mike Null]

Here's one I posted earlier.

http://sawmillcreek.org/attachment.php?attachmentid=92617&d=1216217787

[Devon Jones]

yes that is just what i am talking ab out how did u do it? am i looking into it too much?

[Arturo Villegas]

Hope you can use them.

[Devon Jones]

thank you Arturo

[Steve Clarkson]

Here's one I posted earlier.

http://sawmillcreek.org/attachment.php?attachmentid=92617&d=1216217787

Yea Mike......how'd you balance that golf ball on 1/4" acrylic?

[Mike Null]

Steve and Devon

That's a magic trick I learned from the great Slydini.

Actually I drilled a shallow hole in the wood, about 1" in diameter by a quarter inch deep and epoxied the ball.

The text on the brass plate is laser sublimated.

This was for my neighbor so I didn't charge but he insisted I accept a bottle of Scotch which I forced myself to take.

[Ed Bagley]

Arturo
Can you resend as an uncompressed AI?