Eduard Nemirovsky
03-29-2009, 5:56 PM
Hi, I can not find in a manuals or SawStop web site, but it is a possible to make blade alignment on contractor type SS?
When I bought a saw, I did check all alignments and everything was in perfect or good range. Now, after I start having burn marks with every blade - my fence parallel to the miter, but my blade deviated to the right for 0.015-0.017". By manual max - 0.010".
I can move far end of the fence to the right, but firdt I would like to find if it possible to align the blade.
Thank you,
Ed.
When I bought a saw, I did check all alignments and everything was in perfect or good range. Now, after I start having burn marks with every blade - my fence parallel to the miter, but my blade deviated to the right for 0.015-0.017". By manual max - 0.010".
I can move far end of the fence to the right, but firdt I would like to find if it possible to align the blade.
Thank you,
Ed.