Router Bits for the Keller Dovetail Jig

[Bill Miltner]

Anyone know a source for the dovetail bits that 'fit" the Keller 2400 jig. They're available from the factory, but cost $100+ for the set of 2 and that is just too much..

[Jim McFarland]

Don't know the numbers but routerbits.com has several Keller bits. If Whiteside makes them, then contact Brian at Holbren as IIRC he can obtain all the Whiteside bits.

http://www.routerbits.com/cgi-routerbits/sr.cgi?1238122718_4770+70

[Jamie Buxton]

Whiteside and CMT make bits for the Keller jig. Check the Woodcraft site for both. MLCS has them in the last printed catalog that I have, but not on the web site.

[Jamie Buxton]

Amana makes bits for the Keller 2401 jig. Their P/N 45884 is the dovetail bit, and 45472 is the straight bit. The pair is less than $38 at Router Bit World.