CL Jet Saw

[Ken Higginbotham]

Can you still get bearings for this saw?

Link (http://atlanta.craigslist.org/tls/1091019723.html)

And what about a fence?

[Jeffrey Makiel]

I'm betting that you can get bearings for most anything including this saw. I doubt these bearings are unique. If anything, check out the Jet Woodworking website for a service center near you. Otherwise, pop them out, measure them with a caliper/micrometer and match.

-Jeff :)

[Ken Higginbotham]

Thanks Jeff, I thought they may be universal. I've been looking for the manual on the net.

[John Thompson]

Bearing can be had when matched up.. that should be no problem. The fence will be the expense unless there are other issues not mentioned. If you want to call the gentleman to arrange I could drop by to see it since it is here in town.

Let my know by PM or just call me.. you have my number if you intend to pursue.. If not a lot is wrong with it.. it could be a nice fixer-upper TS to re-sell for a small profit as I doubt you would get more than $600-$700 used after adding a $200-$300 fence system. Just keep that in mind.

Regards...

Sarge..

[Ken Higginbotham]

Ok. Thanks John -