3/8" walnut plywood?

[Dan Mages]

I have been searching for a supplier for 3/8" walnut plywood and have had no luck. Does anyone know if walnut plywood is available in 3/8" thickness?

Thanks!

Dan

[Jamie Buxton]

I've never seen 3/8 walnut plywood. I almost never see any hardwood-veneer plywood in 3/8.

You could buy "quarter-inch" walnut plywood. Around here, "quarter-inch" plywood is generally between .19" and .21". Two layers of it would give you something like .4". That's darn close to a real 3/8".

[Steve Clardy]

Never seen 3/8". Just bought some 1/2", $69.00 sheet.
Steve

[Joe Tonich]

I have been searching for a supplier for 3/8" walnut plywood and have had no luck. Does anyone know if walnut plywood is available in 3/8" thickness?

Thanks!

Dan
Dan,

This is where I get my plywood.

http://www.clevelandplywood.com/cpproducts.htm

If you want I can call them and find out for you. I'm almost positive they make their own, but don't hold me to it. ;)

Joe

[Keith Outten]

Dan,

Try Atlantic Plywood, they seem to have it all.

http://www.atlanticplywood.com