Need Manual for Unisaw Model # 38-812

[ken gibbs]

Does any know of a source for an operator's manual for this Delta Unisaw? I bought a rebuilt Unisaw with a Byesmeyer 50" fence kit but the kit did not contain the owner's manual or assembly directions. I want to download this manual directly from the net.

Any help out there?

Ken Gibbs

[David Eisan]

Hello there,

I don't think you have the correct model number. It should start with 34 or 36. Are you perhaps reading something off the electricals?

Thank you,

David.

[bob ware]

Check the Delta online manual library --- http://www.deltaportercable.com/ServiceAndSupport/OwnersManuals.aspx

[Bruce Page]

Why the frown, you should be smilin':)

[ken gibbs]

Hello there,

I don't think you have the correct model number. It should start with 34 or 36. Are you perhaps reading something off the electricals?

Thank you,

David.
David,

The correct model # is 36-812, and the Delta website does not show an on-line owner's manual for this model. So I need an alternate source.

Ken Gibbs
540-867-5027

[Bill Houghton]

www.owwm.com (http://www.owwm.com) often has helpful literature. They list 474 publications for Delta, and they have a forum especially for old iron, and, like many specialty fora, many VERY knowledgeable people.

How did we ever get anything done with offbeat stuff before the Internet?

[Bob Rufener]

This should be the manual you are looking for:
http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/Delta/En%20422-04-651-0064.pdf

[ken gibbs]

This should be the manual you are looking for:
http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/Delta/En%20422-04-651-0064.pdf
I finally got through to Delta's service people. It only took 16 minutes on hold. The needed owner's manual is not on-line, but the lady from DELTA said she would mail a hard copy to me & this would take three weeks. I am glad I am not in a hurry.