Cedar tall HF

[Bill Bolen]

This Red Cedar HF is 13 tall and 7 1/2 wide. Finished with min wax wipe on gloss poly. The final coat was minwax spray on poly then sanded to flatten the finish with 1200 grit black paper, buffed with all 3 wheels. I turned the bark off of this and about threw it out. There were 2 large checks that went nearly to center. I packed the checks full of red cedar dust and filled repetadly with CA. Ended up coming out ok. I really though it would fly apart while hollowing...Bill...

[Bernie Weishapl]

Great looking piece Bill. Really like the form and finish is beautiful. Bill what I do sometimes on cracks like that are to mix epoxy up and then mix in sanding dust. Fill the crack with that and it seems to do a excellent job.

[Steve Schlumpf]

Bill - great form! Beautiful wood - love the glass-like finish! Very nice work!

[David Christopher]

Bill, another beautiful piece.....you must have as much cedar as I do

[Richard Madison]

Very nice. Great work on the cracks too.

[Keith Burns]

Very nice William, great form !

[alex carey]

nicely done...again.

[Steve Mawson]

Very nice, your finish always looks elligant. I bet it smells great while you are turning as well.

[Curt Fuller]

That's beautiful! I'm always amazed by the shine you get on your work.

[Mike Golka]

Nice save. Great looking peice.

[Jarrod McGehee]

Bill that is a terrific job. nice job on keeping the piece intact and the finish looks like glass. it's great! ;)

[Wayne Bower]

Bill, that is really nice.