Inside corner braces/bracket thingys..

[Jason White]

Trying to find some inside corner brackets (braces??) for a shop project. Building a wood frame and want to have something like these (picture) on the inside corners to support a cabinet saw. Sort of like a triangular-shaped "shelf." Would prefer powder-coated black. Probably 6-8 inches would be great.

Anybody know of a supplier for something like this?

[William OConnell]

It looks like a simpson strong tie.
You can look in there product catalog for it here
http://www.strongtie.com/products/alpha_list.html?source=topnav

[richard poitras]

Jason , not sure if you have a pocket hole jig or not but I make my own out of wood and just pocket hole them in place. Works great and depending what kind of top you are putting on makes it easy to fasten the top, (also most of the time I just make them square instead of triangular)
Richard

[Jason White]

No, I need something steel that won't be visible.

It's the same type of thing you see on any store-bought mobile base for woodworking machines. I just need them without the wheels and other hardware attached.

Thanks, though.

Jason


Jason , not sure if you have a pocket hole jig or not but I make my own out of wood and just pocket hole them in place. Works great and depending what kind of top you are putting on makes it easy to fasten the top, (also most of the time I just make them square instead of triangular)
Richard

[Jason White]

Already looked in their catalog. They don't have what I need.

The one in the picture is made by Stanley, but it's very small. I'd also like to find something powder-coated. I'm sure it's available someplace.

Jason


It looks like a simpson strong tie.
You can look in there product catalog for it here
http://www.strongtie.com/products/alpha_list.html?source=topnav

[Dustin Lane]

Sorry, the largest I could find was a 4" one that was zinc coated. Searched thru amazon, grainger, and a few other catalogs.

[Jason White]

I did too. Thanks just the same!

Jason


Sorry, the largest I could find was a 4" one that was zinc coated. Searched thru amazon, grainger, and a few other catalogs.