David Sparks
03-03-2009, 8:14 AM
After much research and asking a lot of questions I've finally ordered an Oneida V3000. The Recession Buster package they're offering comes with a HEPA filter that seemed too small. I talked to the owner of Wynn Environmental, and he said I would be fine with the standard filter that normally comes with the V3000. It is a larger filter than the HEPA one included in the package deal. I talked the Oneida sales rep into substituting the cheaper spunbond filter in place of the more expensive HEPA filter but was unable to get any price break. Oh well! I probably should have ordered a Clear vue, but I didn't want to do the extra work to get it set up. I was also concerned about the noise level and wanted to be able to move the cyclone around a little until I figure out where everything will work best in my shop. Thanks for all your help with this decision. I'll let you know how the V3000 does when I get it.