Wolverine JoolTool?

[Frank Einstein]

Has anybody ever fitted a JoolTool with something like a Tru-Grind or Wolverine jig? I'm just about to embark on that adventure, and any insights would be helpful. If you've ever used a JoolTool, you already know exactly how cool this would be. The perfect sharpening system if you could combine it with a Wolverine.

I see the jig suspended over the JoolTool, with the chisel coming up from underneath the disc, in true JoolTool fashion. Watch it as you sharpen the perfect bevel in about ten seconds. It can't be bad. It just can't. You get to watch every step of the way.

[John Shuk]

Welcome to the Creek.

Don't know the feasability of doing that. Wolverine was made for a typical grinder.
By the way The Terms of service for Sawmill Creek require that a REAL first and last name be used.

[Jim Evans]

Frank - never heard of anyone trying this - let us know how it works.

Welcome to the turning forum - lots of good information here. I don't post much but I learn a lot from everyone.