Internet Order Bandsaw Blades

[Jon McElwain]

I need 93.5" bandsaw blades that I can order on the internet. They are for a Grizzley 14" Bandsaw. Grizzley made the saw to only accept this goofy size, so I can not run to the local hardware store for re-supply (Grizzley does not sell them anymore. I need an internet source that will let me order only one or two blades. There are several made to order sites, but they all require $100 (or thereabouts) minimum orders. I don't need $100 worth of blades, just $12.95 worth!

Oh, Grizzley customer service said that the saw would take a 92.5" blade - turns out the new version of my model accepts both, but mine is old enough that it only takes the 93.5".

Anyone know a good site?

Thanks,

Jon

[Jim Becker]

Go the the Suffolk Machinery (http://www.suffolkmachinery.com) site and call them on the phone to order. Timberwolf blades and priced much lower than typical retail, even for those that use the same blade stock.

[Dave Falkenstein]

Try Timberwolf blades:

http://www.suffolkmachinery.com/silicon_steel_pricing.asp

According to the chart, they will make any size you need.

[Wes Grass]

Is 7' 9-1/2" close enough? ;-)

McMaster-Carr has a pretty good selection.

[Jon McElwain]

Thanks all!

Yeah, I think the 7' 9-1/2" length will work.

You sound like the guy who interviewed me for an apprentice job in his cabinet shop. Wanted to know if I could tell him how many thousandths were in an inch. ;) I got the answer right, but didn't get the job...