PDA

View Full Version : Urgent Graphic Request - US Navy E-6



Tim Bateson
02-21-2009, 8:43 AM
I do not like relying on you good folks for vector graphics, but I have an urgent request for a vector image of the US Navy E-6 rank insignia. I need to have a plaque completed by late afternoon.
My brother in-law is leaving for Afghanistan Sunday morning and wants to present this plaque to a fellow sailor that is leaving the service before he goes.
My skills are not yet developed enough. I've tried converting the attached graphic, but just cannot get the eagle and anchors.

Thank you.

Darryl Hazen
02-21-2009, 10:47 AM
Tim,

Check out this site. There may be something there you can use.

http://www.defenselink.mil/specials/insignias/enlisted.html

Frank Corker
02-21-2009, 10:55 AM
Here you go.

Dewey Torres
02-21-2009, 12:04 PM
Tim,
What is his rate? The one in the picture is a Boatswains Mate. In lots of graphics they use BMs and a standard but if you want to do it right you need his real rate.

Dave Russell Smith
02-21-2009, 12:16 PM
Now that could be a little embarrassing.:o

Tim Bateson
02-21-2009, 1:12 PM
Dewey,


I was given: AM1 (AW). I'm also using the EAWS badge - which i did find.
So is this the proper rank insignia?

Tim Bateson
02-21-2009, 1:14 PM
Frank you do amazing work.

Tim Bateson
02-21-2009, 1:42 PM
Thanks for the heads-up Dewey. The US Navy's rank are so confusing. I would have engraved the wrong one. My brother in-law confirmed it should be as pictured here.
Great image Frank, all I had to do was remove the anchors.
I'll post a pic when finished.

Dewey Torres
02-21-2009, 1:52 PM
The symbol in the middle of the badge should look like this:

http://upload.wikimedia.org/wikipedia/en/d/d5/Rating_Badge_AM.jpg

Dewey Torres
02-21-2009, 2:01 PM
here it is:

http://ranger95.com/coastguard/avia_struct_mec/am1.gif

Dewey Torres
02-21-2009, 2:03 PM
Thanks for the heads-up Dewey. The US Navy's rank are so confusing. I would have engraved the wrong one. My brother in-law confirmed it should be as pictured here.
Great image Frank, all I had to do was remove the anchors.
I'll post a pic when finished.

We wear that one you pictured in our working uniform E-6 and below but to engrave something you would want the rating badge I posted.

Dave Russell Smith
02-21-2009, 2:16 PM
:DJust a rework of Franks :eek: nothing personal just playing and learning:o

Tim Bateson
02-21-2009, 4:20 PM
OK, here is the final plaque. The name was removed as he/she is not my paying customer, although I'm not charging my brother in-law either. Well that's not true, I told him he owes me a beer when he returns from Afghanistan

I know what you're saying Dewey, but this is the mock-up that was approved. If they later determine the badge does need to be above the chevrons, it's no big deal throwing it on later.

Thanks for all of the short-notice help. Now I have a party to get to and beer to drink! :D