Ooooh...Shiny....

[Leo Graywacz]

My client brought in a vanity sink and said she wanted me to build a 2 drawer cabinet that this could sit on. She wanted the cabinet to be the same size as the sink so it would flow as a single unit. I had to build the drawers with center notches for the plumbing. The finish is gloss white, Resistant (ML Campbell) and that is covered in a gloss clear (ML Campbell Krystal). The drawers are dovetailed and made out of a 9 ply 5/8" European Maple. The pictures don't really show how glossy it is. It is pretty shiny though.:cool:

http://fototime.com/92E94557B8D8669/orig.jpg

http://fototime.com/503851F22A0053D/orig.jpg

http://fototime.com/07B0FEFD63C35D0/orig.jpg

[Mark Placek]

Leo,

Nice clean design, I like your solution for the drain.
I needed to put on my Sunglasses when I first saw the cabinet.

[Andrew Gibson]

looks really good, I like the notch fr the drain line...

Is there room for the supply lines?

[Leo Graywacz]

2" for the supply lines, 17" inside the cabinet and a 15" drawer.

[glenn bradley]

Oooooh, me likey.

[Jim Becker]

Really nice work, Leo. Hopefully, you'll be able to get a shot of it once installed, too!

[Dewey Torres]

I really like the organization of the compartments.:)

[Leo Graywacz]

Really nice work, Leo. Hopefully, you'll be able to get a shot of it once installed, too!

I won't be getting the picture. I'm in Ct and it is headed out to NYC tomorrow. Hopefully the client will be kind and send me a few shots of the installed sink and vanity.

[John Thompson]

Nice work..

Sarge..

[JOHN BRODERICK]

Sweet!

What is the cabinet made from?

John

[Steve Clardy]

Very nice Leo ;)

[Leo Graywacz]

Sweet!

What is the cabinet made from?

John

The cabinet is made from Medex (water resistant MDF) and the drawers are from Euro Maple 9 ply plywood

[Jason Tuinstra]

That's pretty cool!