Glen Dion
02-18-2009, 5:21 AM
In a side by side comparison I picked the Jet cabinet saw over the Delta or the PM. Just did, some years back now. Think the table finish and the fence swayed me.
Anyway - things were getting to be a little less than perfect. And the end all solution was to CLEAN the dang fence. Obviously neglected for awhile it had some build up.
So take a minute, if you haven't already, and take a look at that fence.
An added note: I do buzz green lumber through once in awhile. And I'm sure this has been the biggest factor.
Have a great day all!
Glen
Anyway - things were getting to be a little less than perfect. And the end all solution was to CLEAN the dang fence. Obviously neglected for awhile it had some build up.
So take a minute, if you haven't already, and take a look at that fence.
An added note: I do buzz green lumber through once in awhile. And I'm sure this has been the biggest factor.
Have a great day all!
Glen