coaster tutorial my way

[ROY DICK]

110245

1/2" walnut, drill with forstner 2" bit to .020" deep
110246

determine diameter and knock of corners with any saw, or if using a band saw cut 1/8" proud of diameter. corners knocked off in pic
110247
mount recess in chuck and bring up tail stock tight

110248
turn to desired diameter

[ROY DICK]

110250
cut recess to approx 2 1/8" depending on chuck jaws and to .050" deep.
110251
reverse to chuck and turn top recess for coaster
110252
don't forget to include depth of point of forstner like I did. "Design change', LOL.
110253
You can finish, leave non finished, insert cork for cool beverages or leather for warm beverages. This one will be in the shop.

Thanks for giving a look.

Roy

[Steve Schlumpf]

Roy - that's a real nice photo tutorial! Laid out well and easy to follow! Thanks for taking the time and putting this together! Really nice work!

[John Nowack]

good to know how to do this---my wife ha dthis request on the x-mas list but time constrants and lack of know how put it on the back burner----looks like something I can turn out before her birthday this month

[Ken Fitzgerald]

Well Roy...it looks like you figured it out! Great tutorial! Thanks for posting it.

[Dewey Torres]

Got r' bookmarked!!!! Thanks

[ROY DICK]

Well Roy...it looks like you figured it out! Great tutorial! Thanks for posting it.
Well Ken thanks to you and Steve it looks a lot better than I could have done by myself. Another fine example of the help you get here at the Creek.
Thanks Dewey

[Bernie Weishapl]

Thanks Roy for sharing.