Kevin Groenke
02-12-2009, 12:31 PM
So, we just got our Delta 20-950 Drill Press (so far all I have to report is: it's big)
Anyway, the t slots are an odd size .373" x .600" (less than 3/8" and less than 5/8" why? - not metric either) and Delta doesn't appear to have any accessories specifically designed for the machine/slot. I'm thinking the Festool or Dewalt TrackSaw quick clampls might be a handy solution for hold downs.
Could anybody confirm that either of these clamps will fit in the t-slot.
Also reviews/comparisons of the clamps in question or other suggestions would be appreciated.
109841http://ecx.images-amazon.com/images/I/31amSpOzO1L._SL500_AA280_.jpghttps://www.highlandwoodworking.com/ProductImages/festool/751137.jpg
Thanks
-kg
Anyway, the t slots are an odd size .373" x .600" (less than 3/8" and less than 5/8" why? - not metric either) and Delta doesn't appear to have any accessories specifically designed for the machine/slot. I'm thinking the Festool or Dewalt TrackSaw quick clampls might be a handy solution for hold downs.
Could anybody confirm that either of these clamps will fit in the t-slot.
Also reviews/comparisons of the clamps in question or other suggestions would be appreciated.
109841http://ecx.images-amazon.com/images/I/31amSpOzO1L._SL500_AA280_.jpghttps://www.highlandwoodworking.com/ProductImages/festool/751137.jpg
Thanks
-kg