Mounting Paper to Lexan (Polycarbonate)

[Joe Pelonio]

For one of my wholesale customers I mount a lot of large inkjet prints onto foamcore. Now they want some mounted to .015 lexan. Any suggestions on what sort of spray or roll-on adhesive to use that will stick?

[Doug Bergstrom]

Joe,
Are you face mounting or just regular mounting to the lexan?

[Joe Pelonio]

Just regular mounting, the lexan as a backing. I have done face mounting on it before with prints on clear adhesive vinyl, but this is just heavy paper so I need something that will stick to lexan without being absorbed into the paper.
Dry mounting with 3m laminating film is way too expensive, this job totals about 16 sf.

[Joe Pelonio]

I have to git'r done, so I'm going to try what I have, 3M "77" spray.

Update: It seemed to work just fine.