PDA

View Full Version : Where do I get Older Style Blum Hinge?


Mike Wellner
02-11-2009, 1:52 AM
This hinge in question is around 23 years old, I cannot get this style in locally. Where can I get these hinges online?
I searched google, but they don't look the same.
I have a bad one that won't swing 120 degrees, it has resistance and puts pressure on the stile, causing twist if you force it.

Back: 30.310-11.02 then "16" below.
Thanks

http://img.photobucket.com/albums/v122/mikew13/Picture48.jpg

http://img.photobucket.com/albums/v122/mikew13/Picture49-1.jpg

http://img.photobucket.com/albums/v122/mikew13/Picture50-1.jpg

http://img.photobucket.com/albums/v122/mikew13/Picture53-1.jpg

http://img.photobucket.com/albums/v122/mikew13/Picture54.jpg
Mikail Khan
02-11-2009, 8:46 AM
Try cabinetparts.com

Send them an email with the pics. They may be able to get a replacement for you.

MK
Bruce Wrenn
02-11-2009, 10:03 PM
Look at either Blum 33's, or 38's to replace this hinge. Designed for face frame cabinets. Mounting plate system will be a little different. 33's open to 110, and 38's open to 105. Rockler stocks the 38's for about $6.50 a pair.
Karl Brogger
02-12-2009, 10:10 AM
38's use a single screw for mounting to the frame. 33's are either the same hinge, or closer to what he has.

For the Compact 33's the hole should be a 35mm, and drilled 2.5-3mm from the edge according to my catalogue. At wholesale prices they're $1.37 for the hinge. (screw in type), and depending on your overlay the mounting plates are $.91-$1.04 a piece. I'm not sure what the retail prices are.

Compact 33 - B033.360NI

Mounting plates-
1/4" OL B130.1100.24NI
1/2" OL B130.1100.23NI
5/8" OL B130.1100.26NI
3/4" OL B130.1100.22NI
1" OL B130.1100.02NI



www.hdlusa.com (http://www.hdlusa.com) There's a link somewhere on there to the retail side of things.
Walter Deodiaus
08-27-2013, 10:35 AM
I have the same parts. I see the Blum 33, which have the base plate reversed. I just don't want to drill new holes and finish the job quickly. Unfortunately, these don't seem to be available anymore. I was thinking of taking the hinge apart and replace the broken part inside, but that is work to pull it apart and put it back together again.