Stanley Campbell
07-06-2004, 7:05 AM
Thanks to you guys;) I have a Tool Gloat:D . Since I needed something to sharpen my Lathe Tools with, I figured I might as well get as good a tool as I could so I bought the Tormec sharpening system. I have been fascinated my sharp things all my life and have spent quite a bit of time learning how to hone my knifes to shaving sharpness. Read the book, watched the video.... Then I proceeded to sharpen every knife in the house. I have not gotten them as good as the guy did in the video I saw on sharp tools web site, but I am learning and the time it takes is extremely short. Next I proceeded to sharpen a Gouge, again not perfect but it is sharper than it was, and I love the polished look. I also sharpened my miniture set of lathe tools. I just had 1 problem and that was with the skew as it is to small for the Tormec skew jig, so I had to hold it by hand. It looks like I will have to come up with something to make this better.
God, I love new toys:p
Stan
God, I love new toys:p
Stan