Doug Jones
07-05-2004, 10:22 AM
After a long while of spending time in the shop and lacking in space, I decided to purchase an add on router table and build a shelf for the saw.
OH yeah, almost forgot. The bandsaw came in last week also. Not pictured is the Delta DC I got to go pick up today (used, original owner replaced it with an Onida system). You can also see why I posted the shop floor unlevel post earlier.
*footnote- if you have a Delta contractor saw with the non Uni-fence or Beismeyer fence I do not recommend the MLCS router table. It was a real bear getting it installed. I still have some leveling to do with it.
OH yeah, almost forgot. The bandsaw came in last week also. Not pictured is the Delta DC I got to go pick up today (used, original owner replaced it with an Onida system). You can also see why I posted the shop floor unlevel post earlier.
*footnote- if you have a Delta contractor saw with the non Uni-fence or Beismeyer fence I do not recommend the MLCS router table. It was a real bear getting it installed. I still have some leveling to do with it.