spindle sander sleeves recommendations

[Jonathan Spool]

Big day! Pulled the trigger on purchasing a Griz 609X, and a Shopfox W1686 spindle sander.
Are there good and better sleeves available out there for the spindle sanders, or does everyone purchase the sleeves sold by the sander manufacturers? I didn't order any sleeves with the sander as I am waiting to find out if some will load up less quickly than others.
Thanks
Jonathan

[Perry Underwood]

I'm using the ones sold under the Jet name. Bought them from Amazon.com. No problems. By the way, one hint that I can give is not to tighten the nut on top of the spindle too tightly. Doing this may deform the spindle. Then it's difficult to get a square side. Don't ask me how I know this.

[Kyle Kraft]

I have the Jet benchtop model and I buy my sleeves from Grizzly. There is a page in their catalog that has sleeves the correct length for the Jet.

[Stephen Edwards]

I buy the 6 packs from HF in various grits and have been satisfied with their performance.