Gary Max
02-01-2009, 6:40 PM
It did not start off to be a jar but that's how she turned out.
I hooked a knot in the inside near the base and jumped the tool---if that makes any sense. Busted the top 4 inchs off the vase and now she's a jar.
Jars have lids;)
Anyway fresh off the lathe with nothing more than a coat of oil. With the lid she stands 20 inchs tall. Maple with some curl and a bit of birdseye in spots.
The lid is wetter than the base as it drys they will color match---both are from the same stock
I hooked a knot in the inside near the base and jumped the tool---if that makes any sense. Busted the top 4 inchs off the vase and now she's a jar.
Jars have lids;)
Anyway fresh off the lathe with nothing more than a coat of oil. With the lid she stands 20 inchs tall. Maple with some curl and a bit of birdseye in spots.
The lid is wetter than the base as it drys they will color match---both are from the same stock