Rick Huelsbeck
01-27-2009, 2:06 PM
In a previous post (http://www.sawmillcreek.org/showthread.php?t=102650) I gloated about the deal I got on a ridgid table saw.
Finally finished getting it put together today. I have only ever used a direct drive saw before today and I'm wondering why I have not done this sooner. It certainly is a lot quiter than I'm used to. Smooth operating and makes a really nice cut too, (comes with a 40 tooth blade) well at least on poplar. Only adjustment I had to make was to set the blade paralell to the miter slot, in all took about 4 hours for me to get it all together.
I am going to love this saw.:D:D:D:D
Finally finished getting it put together today. I have only ever used a direct drive saw before today and I'm wondering why I have not done this sooner. It certainly is a lot quiter than I'm used to. Smooth operating and makes a really nice cut too, (comes with a 40 tooth blade) well at least on poplar. Only adjustment I had to make was to set the blade paralell to the miter slot, in all took about 4 hours for me to get it all together.
I am going to love this saw.:D:D:D:D