View Full Version : Dilemma solved for now but ideas needed (finshed pic heavy)
Dewey Torres
01-26-2009, 1:03 AM
As a new turner, I recently mounted an 8”bench grinder to replace my old 6”
I have no new room in my shop and decided to make this to fit my existing space.
After further review and help from the Creek, my vari-grind will not fit up close enough to the wheel and I have no room to move here so I adapted to this:
108104
Here is how a made it.
Aluminum right angle
108105
QSWO form the Morris Chair scraps
108106
CA glued to the aluminum
108107
Dewey Torres
01-26-2009, 1:12 AM
Next to fit the other side...creating a slider
108109
pics and process as shown below:
108110
108111
Cut the excess and bevel the stock
108112
Lay out the lines for the end stock
108113
Dewey Torres
01-26-2009, 1:26 AM
Here is how I lined everything up.
108114
108115
I scroll sawed this shape to keep the nut captive
108116
Drilling a hole for he nut
108117
Nut ready for placement
108118
Dewey Torres
01-26-2009, 1:42 AM
Tape over the hole to fend against epoxy dribble.
108119
Epoxy at work!
108120
V groove bit set up
108121
Lay out lines thank to my new turning tool!:D
108122
Cut r' off at the band saw
108124
Dewey Torres
01-26-2009, 1:51 AM
Drill hole for the screw
108125
Expoxy the screw to the aluminum
108126
Done deal
108127
Move on to the supports
108128
Ready to glue the end piece on
108129
Dewey Torres
01-26-2009, 1:58 AM
Who was that knocking Harbor freight stuff???
108130
Almost ready
108131
Cut r' free
108132
Finished product
108133
In action
108134
Dewey Torres
01-26-2009, 2:05 AM
I like the design but when I tried it for the first time the epoxy gave way when I tightened the little knob I made for it which is why in the pics is it without the knob.
I might have used a standard thumb screw or something but that also tells me that over time the other parts will fail as well.
Any suggestions to make it more rugged are certainly welcome!
I was thinking a tubular steel that would fit precisely over the outside of the jig bored and tapped for machine screws???
Steve Schlumpf
01-26-2009, 7:44 AM
Dewey - Wow! You really put some thought and effort into this! Other than the knob failure - I sure hope the rest of it holds up! The knob could be replaced with one of those 1/4" 20 knobs everyone uses for fixtures and jigs.
Totally different approach - you could consider placing the grinding station on some form of a heavy duty gate hinge so you could swing it away from the wall when needed - swing back when not in use. Yup, always something.....
Hope your lathe shows up today!!!
Jim Kountz
01-26-2009, 9:06 AM
Wow Dewey the engineer was at work yesterday!! Seems like you get the knob issue taken care of this should work out for you. I agree that if you could find a piece of steel that would slip over the existing part of the jig it would probably be more robust than the wood, but the QSWO sure is pretty!
First thing I thought of when looking over your pics was it would be nice to have such an adapter like you made simply to have two different grind setups available at the same time, say a bowl gouge and a spindle gouge. You wouldnt have to move the arm at all for either one. Just something I was thinking!!
Jeff Nicol
01-26-2009, 7:12 PM
Dewey, Heck with all the time you put into that you could have bought a little 110v welder and used some steel angle!!!! Just kidding !! I have a welder and it sure does come in handy for times like that! You did a great job on it, and as long as it does the job it is perfect!
Have fun,
Jeff
Dewey Torres
01-26-2009, 7:18 PM
Dewey, Heck with all the time you put into that you could have bought a little 110v welder and used some steel angle!!!! Just kidding !! I have a welder and it sure does come in handy for times like that! You did a great job on it, and as long as it does the job it is perfect!
Have fun,
Jeff
So Jeff ... you made a sliding one? Can you show me what you did?
Scott Conners
01-26-2009, 8:29 PM
Dewey -
Another solution I have seen was just drilling a hole in the top of the wolverine arm that is sized so the vari-grind will pivot on it - you have to be more careful with your grip though. I had contemplated doing a similar thing to my setup, but I was going to put a hex headed bolt into the hole and drilling a set of holes into the head to make a pocket of sorts.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.