Michael Eckstein
01-24-2009, 5:34 PM
New to this forum and was just wondering if any of you have used this blade?
http://www.amazon.com/Forrest-DH10807100..._pr_product_top (http://www.amazon.com/Forrest-DH10807100-Duraline-10-Inch-Melamine/dp/B0009H59PK/ref=cm_cr_pr_product_top)
We are cutting a product called Pro Core (1/2" plywood sandwiched between 1/4" MDF with thermofused melamine faces) and also plywood laminated on both sides with cabinet liner (china birch core and is having the cabinet liner laid up in China also). I am actually having the most chipping problems on the plywood with cabinet liner faces. Top side, of course, is fine but the bottom looks horrible. All of our blades are Amana brand and we have tried 60t TCG, 60t HATB, and 80t HATB. I was just curious if the Forrest blade was any better.
Thanks for the input.
http://www.amazon.com/Forrest-DH10807100..._pr_product_top (http://www.amazon.com/Forrest-DH10807100-Duraline-10-Inch-Melamine/dp/B0009H59PK/ref=cm_cr_pr_product_top)
We are cutting a product called Pro Core (1/2" plywood sandwiched between 1/4" MDF with thermofused melamine faces) and also plywood laminated on both sides with cabinet liner (china birch core and is having the cabinet liner laid up in China also). I am actually having the most chipping problems on the plywood with cabinet liner faces. Top side, of course, is fine but the bottom looks horrible. All of our blades are Amana brand and we have tried 60t TCG, 60t HATB, and 80t HATB. I was just curious if the Forrest blade was any better.
Thanks for the input.