View Full Version : Cutter head for your table saw to make bead board
Shawn Siegrist
01-22-2009, 11:09 AM
I thought I saw somehwhere a cutterhead for your table saw to make bead boards, but I can't remember where I saw it at. Does anyone know where I could find one?
Thanks,
Shawn
Alan Schaffter
01-22-2009, 11:23 AM
Magic Molder from LRH and available at Amazon and Holbren. Select from a number of profiles many of which can be used to make beadboard in ply, MDF, wood. It works great. A two insert molder runs about $78 at Amazon (http://www.amazon.com/LRH-PR-MM-Magic-Molder-Head/dp/B000YKE502/ref=sr_1_8?ie=UTF8&s=hi&qid=1232641029&sr=1-8) and inserts about $70 for a set of two cutters. (http://www.amazon.com/Magic-Molder-P-34-Detail-Pattern/dp/B0002GDPZ4/ref=sr_1_26?ie=UTF8&s=hi&qid=1232641350&sr=1-26)
http://ecx.images-amazon.com/images/I/31X57CTD7TL._SL500_AA220_.jpg
Douglas Brummett
01-22-2009, 11:30 AM
http://www.shopnotes.com/issues/089/sources/table-saw-molding-head/
http://www.bladesllc.com/magic-molder-heads.html
David Christopher
01-22-2009, 11:39 AM
sears also has one with different cutting profiles
Jim Becker
01-22-2009, 11:42 AM
Magic Molder is one of the best available...very well balanced making the cut clean and the noise level lower. My cabinetmaker neighbor uses one to do custom bead board for his high-end work.
Shawn Siegrist
01-22-2009, 12:29 PM
Thanks for the information!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.