Philip Florio
01-10-2009, 3:40 PM
I bought some 4X8 sheets of beech plywood.
My first use in using these 3/4" sheets is a box for sandpaper. 1 1/2 weeks ago I cut the pieces and yesterday I went ahead to cut the dado for the shelves. What I found before cutting the dado is the sides which are 13" X15" cupped, the middle cupped inward.
My next project is more important, I plan on building a router table enclosure. Could I be doing something wrong?
Phil
My first use in using these 3/4" sheets is a box for sandpaper. 1 1/2 weeks ago I cut the pieces and yesterday I went ahead to cut the dado for the shelves. What I found before cutting the dado is the sides which are 13" X15" cupped, the middle cupped inward.
My next project is more important, I plan on building a router table enclosure. Could I be doing something wrong?
Phil