Tinted Lacquer

[Scott Phillips]

Guys,
I am working on some built-ins for the den. I am thinking about spraying them with white tinted lacquer (for the first time) to finish them. What I was wondering about is after I install them, I will have to run crown molding across the top, baseboard along the bottom, caulk any gaps, etc, and didn't know if you can touch up these areas with the lacquer using a brush, or what I would use to touch up these areas? Or is there a better way to do this?

Thanks,
Scott

[Joe Chritz]

You could likely use a brush for very small areas and blend it in enough to not be noticeable. Another option is a small airbrush or detail sprayer.

Joe

[Scott Phillips]

Joe,

Thats a good idea. Thanks