PDA

View Full Version : Harley Engine



Neville Stewart
12-30-2008, 11:35 AM
Would anyone have a 3D file of a Harley engine or bike to share? tia Dubliner

Guy Hilliard
12-30-2008, 2:45 PM
Knucklehead, panhead, shovelhead, evolution, Twin Cam, or revolution? And which model of bike?

Neville Stewart
12-30-2008, 3:30 PM
Oh oh!, well I'll take whatever you might send, beggars can't be choosers you know! Honestly I'm not sure but if you have that many WOW! I'll be grateful for whatever you decide, thanks.

Randy Rose
12-30-2008, 5:33 PM
Knucklehead, panhead, shovelhead, evolution, Twin Cam, or revolution? And which model of bike?

Gee, what about Flatheads ? WL ? VL? UL? 45, 74 or 80 c.i. ?
or I.O.E. ? J or JD ? :)

Khalid Khattak
12-31-2008, 7:19 AM
Dear Neville:)

Here is the model of 'Harley Davidson Softail (1987)' in trial version of Aspire. I am attaching the *.crv3D file so that u can open it up and work on it as per ur requirements.


Oops.. I have file uploading problems in my Office network...if u need the Crv3D file i will send u by email.

Your Friend Khalid

Khalid Khattak
12-31-2008, 7:44 AM
Here is another model, but in this case its complete 3D:) Imported in Aspire.. require little tweeking and u will get fine 3D model relief...

Khalid Khattak
12-31-2008, 7:52 AM
Did little work (height adjustments), and the results are very clear... we can remove the engine from it if u want the engine alone;):D

Khalid Khattak
12-31-2008, 10:00 AM
Okay..here are the files:) Password is 'khalid' without(') and all small letters

Frank Guerin
12-31-2008, 9:01 PM
Those were the days. Rigid frame, ape hangers, fishtail pipes and sissy bars that could have been lightning rods. An extented springer with a good rake.

My kidneys could not take the riged frame now and my legs can't take the kick start but d*m it was a life.

The 56 and 57 pans were straight leg and my favorites but if I was rich and in good health I would sure look at a Big Honda cruiser today just to ride. My how life changes us.

james mcgrew
01-01-2009, 8:08 AM
you can use mine!!

jim

Khalid Khattak
01-01-2009, 9:06 AM
Great Bikes u have man:)

McGrew Woodwork... this is on the picture;)... ????? so where are the woodwork man..we need pics...

Joe Trotter
01-01-2009, 11:46 PM
This is one a did a ground up restoration on. I would love to see it in wood :D

http://bigbikeriders.com/photopost/data/500/120167ShovelHead.jpg

Khalid Khattak
01-02-2009, 10:50 AM
wow...Joe..:)..what model is it..u good take caree of it..very nice to see on it:)

Joe Trotter
01-03-2009, 1:49 AM
wow...Joe..:)..what model is it..u good take caree of it..very nice to see on it:)

Thanks Khalid,
It's a 1967 Electra Glide with a generator motor. Mostly stock other than the S&S carb and the stripes added to the bottom of the hard bags. I also had a 66, and a 62.

I no longer have any of them, but the 67 was my favorite.

Joe

Guy Mathews
01-20-2009, 8:51 PM
Would anyone have a 3D file of a Harley engine or bike to share? tia Dubliner


Forget about all that relief carving stuff, here is some of my 3D work from a 4th axis CNC Machine.

http://www.camheads.org/attachment.php?attachmentid=324&d=1232385276

http://www.camheads.org/attachment.php?attachmentid=325&d=1232385294

http://www.camheads.org/attachment.php?attachmentid=326&d=1232385316

http://www.camheads.org/attachment.php?attachmentid=327&d=1232385342

http://www.camheads.org/attachment.php?attachmentid=328&d=1232385361

If there is other work like mine out there, please share it with us. I feel like the only one doing true 3D work.

Neville Stewart
01-20-2009, 9:01 PM
Quite impressive indeed, but I just counted my Axes and I only have three, so relief it will have to be. :-(

Khalid Khattak
01-21-2009, 3:53 AM
Forget about all that relief carving stuff, here is some of my 3D work from a 4th axis CNC Machine.

http://www.camheads.org/attachment.php?attachmentid=324&d=1232385276

http://www.camheads.org/attachment.php?attachmentid=325&d=1232385294

http://www.camheads.org/attachment.php?attachmentid=326&d=1232385316

http://www.camheads.org/attachment.php?attachmentid=327&d=1232385342

http://www.camheads.org/attachment.php?attachmentid=328&d=1232385361

If there is other work like mine out there, please share it with us. I feel like the only one doing true 3D work.
Mathew..can you please post the pictures in this forum...

Guy Mathews
01-21-2009, 7:31 AM
I'll try. I just joined this site and am not sure what I can and can't do yet. If I can put them up as attachments, I will.
Thanks.

james mcgrew
01-21-2009, 8:41 AM
guy those pic's are small enough to go up as attachments, keep up the good work!!

jim

Angus Hines
01-21-2009, 2:31 PM
Become a contributor Guy and you can do anything here, yes they will fit but guest wont be able to see them. Best 6 bucks you'll ever invest, just ask Jim.....


I'll try. I just joined this site and am not sure what I can and can't do yet. If I can put them up as attachments, I will.
Thanks.