- laser won't fire
- Which way is your Focal Lens installed
- GSI laser tubes vs RECI
- Lens and Mirrors for Gravograph LS100ex
- Suggestions for USA sourced Chinese laser
- Feedback on AP LAZER SN4836 laser machine
- Purchasing Thunder Laser - Mars 130 Timeline and review
- Questions about Rabbit Laser
- Images from illustrator to RDWorks v8
- Glowforge release
- Illustrator & LaserCut 5.3 - Exporting Layer Colors
- Importing Machine held up by FDA
- Ruida 6442 controller firmware upgrade
- New here - problems, but semi-solved, with ULS M-300
- Rabbit Laser or Universal
- Boss Laser
- No Epilog G2 fiber galvo thread? 24" X 24" engraving area!
- Full Spectrum Muse Review
- Out to air extraction
- AWC708C or Light Object X7 DSP auto focus
- Ray Fine Cyclops 30W MOPA fiber laser
- Chinese laser axis movement problem... Any thoughts??
- 20w galvo q switch fiber laser y axis stop working
- Epilog Reseller in China - Feedback Request
- For those that have lasers with casters AND feet
- Please help!! Need to reset the tracking on my laser
- Y axis losing origin during engraving
- More setup questions
- Humidity and Temperature Room Requirements for a Laser Engraver
- Help Needed! trouble engraving logo on tumblers
- RDWorks and Speaking English
- Help? S-l-o-w serial transmission of files to laser?
- Circles not circles...
- wavie lines
- Laser Cut ADA tactile and Corel Draw plug in
- In RDWorks Is it safe to adjust the Advanced...Frequency setting on my Reci W6
- ULS Air Assist CFM Rate
- power supply, cable or tube fault?
- Windows 10 - Big Problem with Fonts
- Will this work as a water chiller?
- Late, intermittent firing
- GaAs lens part II -
- Another fiber rotary dilemma.
- Trotec Rotary Proportions Issues - Cone vs. Rim Drive Roller Mechanisms
- EPILOG - Problem with stamps
- Chinese laser engraving double image
- Issue with Universal M25 Machine ID error
- Overlap Error
- Need Help Please!!! Brand new G. Weike LC1390N will not power on.
- New laser has arrived.
- Converting a CO2 to Fiber
- Boss Laser Engraver only engraving on one side...Help!
- Fiber Lasers and Fonts
- laser recharge price
- Who knows anything about Laser Cleaning Systems?
- Engraving on the rotary attachment and Gravostyle 7: need a how to, please
- new LC1390N (80 watt) that completely lost power- in machine gfci flips it off
- Chinese 'Golden laser' 1300 x 900mm bed, 130 watt
- Please check out this laser head unit
- 50w ebay laser will not fire
- Epilog Helix - Questions
- Corel experts- will Corel auto-load jobs-?
- 80w EFR Tube Engraving Quality and Beginner Questions
- RayFine Engraving Speed
- Yongli tubes?
- Speedy300 fault
- fiber laser rotary device - useful?
- water sensor leaking
- Convert Silhouette Studio files to Corel draw
- Power supply fire
- Double Sided Tumbler
- Redsail Clone needs help with chuck style Rotary (rdworks v8.01.24)
- Aftermarket Air Assist Nozzle?
- Accession number
- PLS 360 Not Firing
- Epilog Legend ignores power/speed settings.
- ULS-50PS Tickle Setting
- Punch ViaCAD Pro V10
- LaserCut 5.3 and Rotary Attachment settings ... again!
- Bodor laser purchase process
- Purchase update and questions
- Looking for input on focal lenses
- Power percentages & maximums query
- All Fonts from LaserCut 5.3 in a .dxf
- Corel users underlying & open vectors question.
- 75 watt ext Getting No Power
- Updates on the LightObject "auto tracking" controller?
- k40 laser shattered new mirrors.
- TH and TL terminals on a DC power supply.
- 30W Fiber Laser purchase
- Laser tube problem
- Coreldraw resizing with Lasercut 5.3
- CW-5000 Water Chiller/150watt Laser not cooling properly?
- Chinese 30W Fiber Not Working Right
- RDWorks Vender Setting Motor Parameters MAC
- Corel to DXF conversion
- Adjusting EZCAD2 Freq below 20khz limit to achieve faster more aggressive engraving
- 3000 chiller, quickie hot weather fix
- Reliable EFR or Reci 80w Tube Supplier
- Deeper Engraving on Border when Rastering
- RDWorks changing cut start location on vectors
- Moving a 900 x 600 laser engraver
- I hate computers
- Doing lots of cutting & Tube life?
- Rotary setup for engraving a circle on a cup
- Inkscape problems using Chinese Laser
- Laserworks - Changing the engraving direction from "top to bottom" to "bottom to top"
- Thank You Rabbit Laser
- From a 80w tube to a 100w tube problem!
- Amp service for 100 watt Co2
- Thinking about buying a chinese 30W MOPA laser
- My Newlydraw software won't run on Windows 10
- Laser head overshoot on engraving area ??
- Is it safe to run laser tube with lower power supply?
- blown tube or bad power supply?
- need help quick RDWORKS 8.1.24 !!!
- Laser alignment
- Extra Lines Engraving On Material?
- Sinjoe Laser Issue with power/lens?
- Camtech Laser - Laser loosing power
- Power supply troubleshooting - hissing noise.
- Lifespan of glass Laser tube - going on six years
- Laserworks - Engraving a test grid
- laser not cutting cleanly in plastic/pvc anymore
- new laser machine display not working right
- Q-Switched vs MOPA - A Common Sense Discussion
- booting Windows 10 looses wireless with epilog using network connection
- Trotec Honeycomb table thickness
- DXF file in EZcad 2.9.4
- Cracked lens stops work...
- Help with font
- Epilog Legend 24 - 70 watt laser - motherboard needed
- Laser on/off backwards
- Upgrading Accuris Laser engraver circuit board
- Rotary Attachment for Glavo CLC Fiber laser
- Corel Help
- Corel help
- chinese cutter engraver question
- Trotec vs. Epilog vs. ULS
- PDF's, text turns to garbage on import
- Best pricing/deals on trotec speedy 300
- Learning Curve - CorelDraw to EzCad2
- 3d engraving with DC tube lasers
- Corel X5 printing issue on Zing laser unit
- Help! VL-200 table is stuck!
- CorelLaser can not find CorelDraw
- horizontal alignment of engrave offset from vector cut - rdworks
- Rotary Device for Epilog Legend 24TT stil availble for purchase?
- Anyone heard of the Cubiio?
- Yet another Kickstarter for the Laser to Re Invent the Wheel
- Condensation in Laser Cabinet
- Raster and Vector mis-aligned Epilog Helix Laser
- Newing-Hall 240SE
- 60 watt or 80 watt?
- Z-axis lead screws maintenance
- unusual dot shape when test firing
- New JBT 60 watt Fibre Laser from KBF
- Please halp, Ruida RDC644XG
- Fiber Laser NOOB / I could use some help 20w Galvo
- CorelDraw to Adobe Illustrator?
- Epilog and Help CUTTING
- Whats your thought about Boss lasers ???
- Universal V460 Laser producing low power
- Trotec Speedy 100R, Job Control connection issue
- Universal console/control panel showing no text
- TL-403 Controller U Axis Reversal Remedy?
- RD Works scan issue with multiples
- temp
- Cutting Problems with Epilog
- EZCAD and Rotary Attachment giving lines
- Final Check Before Purchase
- EZCad2 settings file? Transfer settings from one computer to another
- Laser cut looks like static
- Laser Cutting Speeds Chinese Machines Vs High End (Kern, Trotec)
- Purchasing from xtlaser.com
- SVG and AI files in ezcad
- Need help defining laser cutter requirements
- Sudden Y axis problem
- New 50w Fiber Laser
- Gravo IS200 and Aspire
- Internal boundary in Corel Draw
- Question regarding power choice in new machine and upgrade option
- Need help with with vector file for laser.
- co2 laser tube dirty on inside of output lens/glass
- Is my power supply faulty?
- Losing image clarity when putting images into Corel Draw
- Uls vls 6.60
- Fiber Laser Material Settings
- Laser software on Windows 10
- Buying a 30watt laser new to forum looking for reccomendations
- please post pic of your deep engraving work on your 30 watt chinese laser
- Galvo CO2 Laser Information
- Make up Air and Air Extraction
- 9060 laser cutter (MPC 6585 controller) engraving question
- Laser puts a bevel on engraving
- 3dconnexion Mouse
- VLS6.60 laser does not cut perpendicular
- Fiber Laser Marking area and EZCAD settings
- Newing-Hall machine needs service
- Box Fan
- How to get guide light in the center of artwork?
- MOPA owners.
- Epilog 24TT and photo-engraving
- Another font help
- lase beam alignment
- Dremel jumping into the laser engraver market
- Issues with vector vs. raster on ULS 600
- Epilog Legend 24TT Y-axis motor replacement
- Linear bearings: I checked the X motions for smoothness while I had my belt off and
- Bought a triumph laser stopped at customs fda 2877??
- Patiently waiting....
- Job Control Question-Vector Cutting
- Fiber settings vanished--?
- triumph 30watt questions
- Legal actions for a possible dodgy repair
- Rotary fiber engraving issues.
- Font Help
- LaserCut 5.3 Question
- Speedy 100 "on" when it shouldn't be
- Gutting and refitting an old ULS with new drives & tube- what recommendations?
- Inserts
- SCAPS Samlight software for Fiber Laser
- Speaking of fiber rotary issues--
- Dark cloud: my LS900 is fritzing out...
- ULS 350 Versalaser power loss - diagnostic help please?
- Boss LS-1630 X-axis home offset
- 30 watt fiber on anodized al.
- EzCad help needed, Importing file
- Used laser engraver addition
- New to fiber lasering on stainless steel
- Looking to buy a bed co2 system
- focus issue with the fiber, likely of my own doing-
- Cutting with a 20 watt fiber?
- Frustrated in color shift from X4 to X7
- Cutting 1mm sterling silver sheets.
- What causes this
- if it's not one focus issue, it's another!
- LaserCAM A2+ Settings and Maintenance Procedure
- triumph laser ezcad 2 software questions
- laser glasses suggestions want to make sure I am good
- Air compressor recommandation for Epilog Mini
- Rabbit Laser, AWESOME SUPPORT!
- Updating an old laser with a new control board?
- Asset Tag Design Issues
- corel draw
- E-cut plug-in for Corel Draw: great features, but problem with 'Node extension'...
- I'm finally ready to be a guinea pig!
- Engraving problem need your help
- 50w Chinese laser not cutting in Cut mode
- Can your business or hobby survive long if ...