- Sawtooth hanger installation- better ideas?
- Custom Sawmilling - for cants / beams / timbers
- Dust Hood for Makita 2012 Planer?
- Ridgid OSS table problems
- Resaw fence ideas
- Paintable Hardwoods
- Incra TS-LS users - is this normal/how to remedy?
- How to? 60 degree bevel on mid-sized sheet of plywood ...
- Need ideas for Boy Scout woodworking merit badge project
- Source for chromed file hanging rails?
- Scary Stuff - Saw Starts Due to Vibration!
- Help Me Pick a Miter Saw
- Thoughts on tool quality
- Woodshop at local school. Ideas.
- MDF for sled??
- Small Trim Duplication
- Need Recommendation for Lightweight Cordless Drill
- Help! Need lumber source - clear pine
- Anyone worked with Afromosia ?
- My homemade Cheap Chip/dust separator
- RAS - Need advice
- Need some pics of entertainment centers you have built please.
- door construction methods
- unisaw blade to miter guage adjustment
- Picked up a couple of things at the KC WWing show.....
- So I bought a drill press ...
- My impressions of my new Grizzly planer a month later.
- What looks like an awesome Band saw
- Need bigger band saw
- Rigid TS 3650 Herculift help
- Accufence for Powermatic 66
- 4 1/2" Sanding Pads
- Lighthouse mailbox question
- Got my new SawStop Industrial 5hp
- Drill Press advice buy vintage or new
- Momentary loss of concentration > ouch!
- Planer sled and hot melt glue
- I need a new router
- Band saw Bearing seizing
- dewalt radial arm saw
- HD/Lowes Plywood
- Freeman Nailers
- Solid wood furniture input needed
- Skil Flooring Saw
- Creeker's Weekend Accomplishments.....
- Making tenons with Veritas tenon cutters
- Planer head depth gauge
- Advice on piecing together dust collection - Jet horizontal motor to Clearvue mating
- U.S. Made drawer slides?
- Steel vs. Cast Iron trunnions on bandsaw
- Bench Grinder Use
- Great CL Find!
- Easy to use CAD program?
- Bowed Top Help!!
- Good Lumber Source in Central Illinois.
- "O" clearance for band saw and table saw
- Powermatic 1100? good deal?
- Help Identifying Wood Species
- How to remove drawer front from apron
- Honduras Mahogany with like sheet good question?
- A pleated fine filter for a pieced-together DC system?
- my <$30 shop air filter
- Upgrade this "beginner saw" Blade
- Carnival type games woodworking ideas?
- Table Saw Exension: A Tale of Woe... and now what?
- What if we asked Mfg's to....
- Clear hole filler?
- Ridgid Jointer Ready to go
- Noden Adjust-A-Bench with MDF top
- Duncan Phyfe Table - Question on Wood Expansion
- Router Lift Selection
- Advise needed - drawer front construction
- Link belts for Powermatic 66 Table saw?
- Hanging two rows of cabinets
- Is this cut board's warp too much to expect from a hardwood lumber store?
- minor band saw gloat
- Louvers not the same thickness
- Cleaning bandsaw blade tires
- I should have read the directions....Oscillating Mulit-Tool
- Delta 34-555 Sliding Table Attachment Questions????
- Calling A3-31 owners - snipe help
- Combo Machines (used) to shop for
- Child safety and sanding
- Narrow thin pieces seem to be getting gouged/sniped pretty bad with spiral planer
- Granite Saw Top. Pros and cons?
- Looking For USA - North American Made Wood Screw Supplier
- Opinions on the best values in used tools.
- Finish for MDF/Maple bench
- Hitachi M12V Issue
- Moving/Storing Larger Machines?
- Dovetail Jigs
- Motor for Davis and Wells 20" Bandsaw
- Dewalt 733 planer -dust hood?
- Need help replacing arbor bearings on unisaw..
- Porter Cable 557 Biscuit Eater
- Ideas wanted
- Knots,wormholes, and such. Are they blemishes or beautiful?
- 5 minute epoxy as clamp?
- How to attach frame and panel to the front of dovetailed case?
- Murphy Bed
- differences between 3 wheel power feeders
- Need recommendations for a scroll saw......
- Ridgid R4511 Assistance
- Recomendations on "joinery"
- Woodcraft Sale Date?
- The poplar tree is down, now what?
- Basic drilling questions - hand held power drill
- Looking for Walnut or similar exotic wood to build a Machinist's chest
- changing a dj-20 jointer from standard head to a shelix head
- Help choosing a new Jointer-G0490 or G0490X?
- HELP! Ryobi 14.4 Volt charger
- outdoor lattice, do I need screws?
- Peachtree Clamps
- It's coming...
- miter saw requesting permission to take off
- DRO for POWERMATIC MOD 15 PLANER
- Doesn't this look like a Unisaw...
- Sawstop opinion needed
- What blade for resawing 8" pine?
- Wheel of fortune hardware
- Snap Hinge?
- 6" ros disc on a 5" sander
- windsor chair class
- Triton Mitersaw
- Kitchen Cabinet Plywood Question
- Reliant 14" Bandsaw
- Is the HF flooring nailer a jewel or a dud?
- Craftsman RAS or cheap jobsite/benchtop TS or ?
- Drum Sandpaper Question
- Source of aluminium extrusion fence
- My not be gloat worthy...
- Japanese Ofuro Soaking Tub
- Upgrade bandsaw- Laguna LT18
- jet 20" planer kickback
- finally a gloat killer deal on onsrud blades.
- Brand New 1966 PM141 Bandsaw - questions
- Maggi Steff 2048 Powerfeeder mounting to PM2700 Shaper?
- Fastcap tape measures.
- Highland Pattern makers vise $329.00 US dollars
- Cool Bench
- Grizzly Sale?
- Need help identifying this really heavy woodworker's vise (already spent many hours)
- How to properly drill 2 holes for drawer pulls?
- I had no idea... (Hartville Hdwe)
- Creeker's Weekend Accomplishments.....
- Deal ? on walnut
- Need advice ASAP!
- Potential CL scores for those in DFW area...
- Pre glued dowels...any good?
- Planer height for dc 380 ?
- moisture meter selection - need sagely advice
- New to the Powermatic club . . .
- Router in saw wing or separate?
- 1986 Grizzly 18" bandsaw
- Planer upgrade?
- Unibond 800 alternatives
- PC 557 Gloat
- Where do you buy bandsaw blades
- Grizzly 513X2BF
- I'll give up my saw when you take it out of my cold 9 and a half fingers
- loose disc plate in belt/disc sander
- European Table Saw vs Conventional Table Saw like Saw Stop
- Anyone here built the drawer-slide slot mortiser?
- Outfeed table for Craftsman table saw
- Grizzly Planer Died at the worst time, looking for Ideas
- Frosted glass panel doors
- Perceptions of Woodworking
- Are bathroom dividers sometimes made of phenolic
- Woodmaster owners...Outfeed tables, reversing switch?
- tormek optional wheel , comments request
- Scoring motor or belt drive from the main Blade?
- Foredom/chisels/air compressor
- How to glue wood over varnish finish
- Reference scroll sawing book?
- New Kreg product
- Table saw jigs and miter bars - help!
- Tegu Blocks
- Delta 18-900L -- Any reason not to?
- Toys for Tots!
- Drying rack ideas?
- Kitchen Cabinet Question
- Changing copper hardware patina
- Just broke my bandsaw upper guide assembly (Reliant)
- Pattern bit sharpening
- Passage Door Thickness
- Bent a tooth on my bandsaw blade
- Is granite countertop flat enough for flattening?
- Helical head jointer?
- Cabinet Planner Software
- Router table top
- Upgrade to spiral head on 8" jointer, or swap for straight bladed 12" jointer?
- Gluing veneer together
- Just discovered card scrapers
- Source for large (4.5" & 5" diam) sanding drums?
- Best way to repair this chair.
- Floor sander capability?
- How flat must a crosscut sled base be? 1/32" cup OK? Baltic Birch or MDF?
- Supermax drum sanders: looking for input by owners
- Resharpend Planer Knives?
- Do you have a woodworking magazine collection?
- Motor Problem ......... or not?
- Just sayin'...
- What wood is this? - Very Old - Stanley #25 level...
- Kickback on Camera
- Shopnotes #82 Mitersaw Station - Anyone build this or experience with?
- Comments / thoughts on a Delta 14-070 drill press?
- Should I buy the Laguna 14 SUV or the LT16 Bandsaw
- Opinions on the Hammer C3 31
- Back issues: paper vs. DVD
- Delta SM600 Scroll Saw
- Hints for Dewalt DW735 planer owners
- Is this a good deal
- Sharpening Lenox Tri-Master bandsaw blades?
- Jointer Clog - Brain Freeze
- Powermatic Model 87
- Inca Jointer/Planer on Craigslist
- Fastening Joint for Pullout
- festool domino's
- Lion Trimmer Questions
- Corian countertop question?
- Hey Van!!
- My wife wants a Rotex.
- Can we ID this planer?
- Miter trimmer (Woodtek) worth using??
- Kreg miter guage out of square
- Fake the thru-arm leg tenon on a bow-arm Morris chair
- Woodwork stores in California
- What wood or PVC for external trim garage door
- Anyone have a General International model 10-810 CF Cyclone DC?
- Finally had enough...........
- YAKSM (Yet Another Knife Sharpening Method)
- Bandsaw - blade tension vs. blade qualtity
- Flat File/Tool Roll Around Gloat
- Place for planer and router in garage
- I need help turning on my vac boxes from two locations.
- What Makes a Woodworking Machine quiet… or LOUD!?
- Have a new blade. Did I get the right one?
- My new bench is finally done!
- Pad or Random Orbital Sander
- Powermatic 66 Motor Shaft and Arbor Shaft Woodruff Key and Set Screw
- Too Much Miter Saw?
- Need to Build a Blast Cabinet
- Want to buy B & D 5 1/2 inch circular saw
- Making Lumber on a Bandsaw
- 45deg angle
- pass through drawer
- Spray Paint Can Rack
- Powermatic 66 Restoration
- My gloat pics
- Making a router template