- Removing Fingernail Polish from a Table Top
- Rubbing Out Lacquer
- Pre-Stain Wood Conditioner Usage
- polyurethane woes..
- Suggestions on finishing built-in
- I have different color raw cherry, will it darken the same?
- Spraying Laquer
- shellac over aerosol lacquer toner
- Need advice
- Finishing Wenge Veneer
- Shellac Shelf Life
- pine or poplar for painted finish?
- Need help finishing over aniline dye.
- Waterlox
- LVLP Problem
- Paint Sprayer Cleanup and Storage
- Stains that are food safe?
- Retaining wood color
- Grain/Pore Filler Reccomendation
- Will these work?
- Trying to match antique brass hinges
- workbench finish
- Finishing Cherry, How do you do it?
- What woods stain well?
- Briwax original
- Best finish for dining room table
- Cost to Refinish Many Tables?
- Staining Before or After Gluing?
- Finish to retain natural wood color?
- Alkyd Varnish vs Arm-R-Seal
- antique Koa finish?
- How to make wipe-on Poly
- best paint finish for wood toys
- Using Waterborne Lacquer on Ebonized Oak
- Drying wood with "Shellac"?
- Sawdust mixed with wood glue or epoxy as filler?
- Refinishing Prices?
- Sanding Sealer Help
- Help in finishing Beech and Walnut
- Home Bar Top
- Daly's Benmatte Source
- Need advise/opinions
- Dining room table, shellac mistakes, and breadboard ends...
- Behlen Table Top Finish
- Newbie Question on Polyurethane
- Better Wax
- Compressed air filter
- Newbie finishing question
- To thin, or not to thin ...?
- Spray equipment question
- Finishing stair treads
- white oak Vs Red Oak.....
- Veneering over a finished surface
- Best furniture polish/cleaner?
- Last step in the finishing process?
- Child's bed--should I apply water-based lacquor over shellac?
- Pottery Barn stain matching revisited, possible breakthrough
- How many coats?
- Finishing Cherry
- Velvit Oil... a couple questions
- Need Recommendations
- Finishing wood with high moisture content
- 100 yr. table and chairs refinishing
- Nitrocellulose lacquer and temperature
- Uneven Surface After Stripping
- Paint Removal Festool Questions
- Another maple finishing question
- sycamore - preparation and finishing
- Drawer lining
- chemical stripper that will raise wood grain a bit?
- Poly/Mineral Spirits Question
- Making an Oil Varnish
- Problem polishing shellac finish
- Using wood filler with multiple woods
- Filter Material
- desk clock with tung oil
- Replicating a modern finish
- Pine Wood Floor Finishing
- Recommendations on Refinishing Books?
- Water based lacquer
- Looking for a SF Bay Area Finishing Stripping Company
- Painting MDF and popular
- poly over lacquer
- Weird staining issue - need help
- Apollo 7500T HVLP Gun
- Thined Epoxy
- Finishing Red Oak
- I have been asked to repair an ark where the veneer is peeling and slipting.
- S.Maple vs H.Maple
- Water rings
- Oak finishing disaster help
- System 3 Mirror Coat??
- Solid Cherry Top Kitchen Table
- Small Box Finishing
- hvlp sprayer
- Proper painted finish for cabinets
- finishing interior knotty pine
- new finishes on Kitchen cabinets
- Can I sand Tung Oil Finish?
- Newbie: steel wool question
- blo
- Suggestions for water based mahog finish
- Lots of exterior paint work to do
- "Popping" Quilted Maple
- what finish over a photograph.
- Wax over wipe on poly?
- Wipe-on poly over USL?
- "Chalky" USL?
- Stain/Poly/Etc. Can Sealing
- Opinions needed on Tea Tray
- Satin Finish: Favorite?
- Senility is catching up!!
- Natural Edge Finishing
- inside the box?
- Latex Polyurethene help
- Cherry Chair last step
- shellac over poly
- Finishing Chairs for Outdoor Use
- Is McCloskeys gone ?
- Material Sources west of Phoenix AZ?
- Dark wax for dark wood...
- Recommendation - Finishing/Refinishing furniture
- Waterlox over Watco ?
- HVLP Sprayer Question and Dog House
- Best Finish for a Unique Piece of Birch
- Earlex HVLP Spray Station Pro
- Finishing unmatched boards
- Easiest finish for workshop cabinets?
- Painting bookcases
- Furniture refinishing/pricing question
- Dye/Coloring to Bring Up Maple Grain...?
- HVLP vrs compressor and HVLP gun
- Homemade exterior wood sealant
- Need advice on finish to go over a label
- Finishing oak entertainment center first timer
- Edge banding
- sauna bench finishes, wax?
- non-toxic exterior wood sealers
- Interesting statement about finishing
- HVLP or standard pressure spray
- Refinishing bedroom set - question
- Smoke damage
- Help - many???
- Dealing with SHELLAC RUNS
- Best durable finish for cherry?
- A Glass smooth finish (How do I get)
- bar top finish question
- Rockler HVLP Spray Gun??
- Oil Water Compatibility.
- Best durable finish for cherry?
- clear penetrating epoxy: as good as it sounds?
- Plyboo
- Shellac and BLO
- Ebonize long leaf pine?
- Another Maple & Dye question.
- Question about Clear Poly
- Tone down a finish?
- Finishing MDF
- Wipe On Poly
- finishing a small piece of walnut
- First time using Tung Oil
- Brush Cleaning
- Blotchy Cherry
- Koa Wood
- Finishing Books
- one more question?
- Finishing Doofus
- Upgrade Turbine HVLP Gun - Accuspray or Capspray/Wagner?
- Requesting Finish Advice for Unusual Items
- Spraying Minwax products?
- Iwata lph 200 siphon gun, thoughts and opinions?
- How Much Staining?
- Cherry Finishing / Staining
- Brushing Shellac ?
- Shellac Nibs killing me
- Recommended Finish for Walnut?
- New to Spraying Finishes
- Fixing tear-out at surface of plywood
- finish/top coat on oil base paint
- Prefered finish on maple cabinets
- Stripping Down To Bare Wood
- First-time Milk Paint User
- WD-40 In Finishing/Refininshing Process????
- Wagner HVLP Conversion Gun and SW Proclassic
- Cedar Bluebird Houses
- What direction to spray in
- new to finishing..with a glue problem
- How many coats wb lacquer
- staining reveals lines in plywood
- Quartersawn Oak Finish
- Manzanita Burl Finish
- Finish for napkin holder
- Rubbing Out A Polycrylic Finish
- David Marks finish?
- oak filler
- Refinishing wood floors out of 100yr old house
- Do I finish the inside?
- Recomendations for Ebonizing woods.
- How to keep Maple & Pine White??
- Which finish remover?
- Whitewashing??
- removing water rings
- Finish for tool handles?
- a finishing question
- Trying to match a stain
- Pore Filler
- Do I need to strain shellac?
- Walnut dining table
- finishes
- Finishing Trim
- Shellac shelf life
- what did I do wrong?
- Lacquer over Pigmented Shellac?
- Mahogany Grain Filler
- Finishing spalted maple
- Finishing and Sealing Mahogany with Shellac
- Finishing Exotics
- Masking Shellaced Areas Without Tape Damage
- Advice on HVLP PAint
- Rubbing out a shellac finish
- Any ideas?
- Wax on Lacquer
- A Topcoat Over Arm-R-Seal???
- Painting cedar for window flower boxes
- 1st attempt with HVLP- Partial Success
- Seal coat for tinted WB Lacquer
- New to finishing and suffering from information overload
- Tinting your own wax?
- cabinet matching
- Finishing Maple Cradle
- Mini tire spike/finishing accessory?
- Tung Oil - How much do you actually wipe off?
- Finishing over stick on decals
- Shellac Fumes
- Pore filler: before or after shellac?
- Paint for speakers?
- Clear finish on MDF?
- Assemble before or after finishing?
- Black finish - Target USL or GF Enduro?
- Help with finishing MDF and Maple
- dye over oil stain?
- Sanding question
- Tinting shellac
- Best white stain for treated pine outdoor furniture?
- Target USL Question
- Finishing issues and big project...
- Wipe on poly over danish oil (or tung oil)?
- Painting plywood carcasses w/adjust. shelving holes
- Can I salvage my Waterlox?
- Finishing Maple Countertops