- waterproof finish for bocote?
- HVLP finish suggestions
- What is the Best Finish for Walnut Dining Room Table?
- Outdoor Finish for Brass
- Advice for Bubinga Coffee Table
- Tung oil on Red Oak Problems?
- Prefinishing questions
- Fumes triggering carbon monoxide detector
- Problem finishing cherry
- Safe Crib Finish
- Waterlox Fumes
- Magazine Review: HVLP "One-stop shopping but slight orange peel"... your comments?
- HVLP & CFM's Understanding
- Finish for a rough barnwood bar top
- woodgrain filler
- purchasing shellac flakes
- Watco and cherry
- Anyone heard of or used Envirotex Lite?
- Need help selecting a sealer.
- Best finish for Hickory flooring?
- How long for a stain to dry?
- Parquet teak floor
- question about boiled linseed oil
- Transtint
- Staining maple
- Knotty Alder Finishing "Recipe"
- Wood Finshing
- Stains
- Shellac
- Need help getting the stain right...
- Problem with General Finishes's Stain
- finish for Walnut bed
- How do I stain sycamore?
- American Cherry on historic storefront
- Wax for Drawers
- Looking for a durable finish.........
- Wagner HVLP Conversion Gun
- Cloudy poly help please!
- Need advice for tinting shellac
- Cypress finishing question
- Gun Cabinet out of Cedar
- Finish suggestions for mahogany
- Staining Black Walnut
- Stain color tinting
- Clear finish to fill a recess
- Maple.dye
- Greene & Greene style mahogany finish
- Western Red Cedar Pergola - Stain- UV protection
- Staining Beech
- White oak finishing
- "Child Resistant" Finish??
- Need Clear Finish for Ash Cabinet
- More Shellac ?
- Michael's Cherry Stain
- Stripping polyurethane from antique bed
- Question about maple staircases & removing the finish
- Behlen mahogany pore filler?
- VERY Dark Stain
- Simulating Milk Paint
- Walnut Shellac Question
- Mission Oak Coffee table
- Does shellac lose its ability to protect over time
- Spraying HVLP
- Finishes for Poplar
- BLO/Poly blend over poly, OK?
- pine log finish?
- Refinishing Birch Dining Room Table
- Spalted Maple
- Refinishing Stair Handrail
- What next?
- turning table top black?
- color/finish matching - with pic
- Viscosity Cup?
- What comes after tung oil on cherry?
- Staining Procedures for Maple and Blended Woods
- Black Grain in Red Oak
- Danish Oil Poly Blend on Cherry????
- Waterlox question
- Finishing kitchen cabinets
- Paint over old gold leaf?
- Sand shellac barrier coat?
- Drawer Finishing Ideas
- filling in gaps
- Shellac over Spar Varnish?
- How to finish both sides of a table top
- Shellac Before Stain Fully Cured?
- finishing exposed ends of birch plywood
- Oil VS water based stains
- Birdseye Maple
- Walnut/ Maple Table Finish
- Finishing books
- Rubbing out enamel
- Best finish for a Restored Truck Bed? (Red Oak)
- Spar Varnish recommendations
- kitchen cabinet interiors
- Finishing Maple Cradle
- Matching Molding to Stained Birch
- Shellac No-No
- Finish for a machete handle
- Can I use glaze as a topcoat
- help in finishing
- Teak Oil- How Long to Wait Between Coats?
- Spraying Latex Paints?
- Buffing Arm-R-Seal
- Basswood
- Finish for silverware box
- transtint over BLO?
- Working with Purpleheart.....
- Need a top coat for "tung oil"
- Wax on Teak Oil?
- Newbie - Recommendations Finishing Black Cherry Mantle
- What type of stain?
- Cutting board finish needed.
- "black" finish
- Winter and woodworking.
- tinting wipe-on poly
- pool cue finish
- recommended BLO (for black cherry)?
- Rescuing a lacquer finish
- waterlox question
- Varnish
- Glue up after staining
- Old Finish for new Projects
- Looking for a dark stain for Red Oak
- Finish advice (longleaf pine + oak)
- Stripping Water Based Topcoat
- waterlox dry spots
- What Color Dye for Tiger Maple???
- Polyurethane Finishing Help
- Applying Behlen's Rock Hard Vanish
- Final Coat
- Pre-finish or glue up first and then finish
- Can I accelerate the natural cherry darkening process?
- Flat Black Picture Frame
- Solvent Poly over Water Poly?
- ebonizing finish
- Mildew/blue-green algae infesting my new door...
- Question from a rookie finisher...
- Cold Weather Spraying
- Finishing General Arm-R-Seal
- Suggestions for a Cherry finish on pine?
- Does Mineral Oil "Dry"?
- Looking for finishing suggestions for a poker table
- Filling grain
- what thins what
- Walnut finishing schedule
- Kramers antique improver Anybody use?
- Newbie question
- Newbie at conversion hvlp
- Finishing Paudauk Questions
- I'm wrong---concrete dust, not mildew
- Danish oil & minwax stain
- Tried and True Varnish Oil Question
- staining maple?
- Next maple finishing question?
- More questions...
- finish repair.
- Question about using boiled linseed oil.
- Steinway Piano Finish
- Kitchen Cabinet Finishing
- Arm-r-seal not drying/curing......HELP!!!
- Salad Bowl Finish Uneven Looking
- durability: watelox only or shellac overcoat
- Waterborne Floor Finishing
- Penetrol by Flood products
- What's the story with gel stains?
- Has anyone here used mixol universal tints?
- Have any of you used mixol universal tints?
- Laquer and oil based glaze
- Where to find dye or powdered pigments?
- Paint thinner & mineral spirits
- doll bed finish?
- Would appreciate a little help with Waterlox
- Another cutting board finish Q.....
- Stupid is as stupid does.
- Confusing
- Overcoating Shellac
- old school desks
- Need help soon, re: box finish.
- Finishes described and compared
- Repairing Stain damage under poly??
- TransTint Ratios?
- insect damage and finishes
- Zinsser poly
- Ash Ebony Dye - Wrong
- HVLP & conversion varnish
- Finishing Mahogany and Wenge
- Water Based Acrylic Color Selection
- Finishing Cherry
- Finish woes from a new finisher. long.
- looking for some color...
- Dying Pine
- How long till min wax dries enough to clear...
- Hybrivar on Walnut
- Material Compatability
- Watco Danish Oil
- Quick finish for lacewood
- Color perception after eye surgery
- Lye used to darken Cherry
- Spray/Finish room
- Target HybrVar
- Oak Ply bookcase suggestions
- Shellac ?
- brushed gold foil wrap
- Excentuating color differences
- Advice please
- InslX Cabinet Coat
- Tiger Striped Red Oak
- help needed-what's your favorite color?
- Using a spray gun in the shop
- Spray gun for paint and laquer.
- Balance Beam Finish
- A Little Advice, Please...
- Hi Gloss Table top?
- spray gun advice
- Is Waterlox Sealer necessary under WL Satin?
- finishing schedule compatibility
- Spraying GF Arm-R-Seal
- Finish for Black Walnut dinning table?? Thinking Watco oil..
- Oily wood
- Novice at finishing. Some questions
- The Ultimate Finish Question?
- Finish on drawer slides?
- cloudy polyurethane
- Darkening Walnut
- Trying to match Pottery Barn "stain"
- Advice on finishing hemlock,please!!
- Decals on wood
- 1st Time Sprayer, need material advice
- What is the best water based Paint to spray?
- Epoxy Inlay on Paint
- Hand rubbing water based varnish?
- Finish over wax?
- PaperIllusions Topcoast
- Target coatings?
- Gel Stain pros and cons
- Lignum Vitae ?
- Oak and Water Based Aniline Dye
- Bad Shellac?
- Looking for air brush recomendations
- Measureing %
- What would you buy for $150-300?
- Dance Floor Finishes
- Rubbing Out Varnish
- Problem with dye on maple
- Best finish for kitchen cabinets?
- Ebonizing alder schedule
- What to do with old Polyurethane?
- first project, several questions
- Refinishing Altar Table