- Staining Cane
- Bathroom-proofing wood
- Spray Painting interior doors....
- Fun Project
- Finishes for an Outdoor Sign
- Mineral Spirits?
- For Doug Evans...
- Changing finishes from satin to high gloss
- Deck Chair Finish
- Help with wood fillers
- red cedar
- Should I wax over Watco Oil?
- Wagner HVLP Conversion gun / Latex Thinning.
- Waxing/Polishing
- Finishing Black Walnut
- Removing dye from maple?
- Durakyrl 102 or Good Stuff
- Wood dye suggestions
- wagner HVLP
- What is BLO good for.....
- Need some help with water based dye and Titebond
- Epoxy finish
- Mail Box Post Finish
- Spraying LATEX PAINT
- finishing maple
- finish for cherry
- Sanding Sealer & BLO Questions
- Finishing question for those on the other side of the Atlantic
- How do you seal the smell of BLO?
- Finishing help for roll top desk
- Shellac help?
- 3M paint preparation system
- Finish for old tool handle
- Paint/primer compatibility
- Wax ?
- shellac under polyurethane
- How do you wipe?
- HVLP gun and remote cup
- Protective Finish Over Tung Oil
- airbrush
- tinting watco
- Rottenstone
- Hvlp Spray Gun -- Overspray
- Poly question
- Cherry Finish?
- Spraying Stain
- Tung Oil over stained furniture?
- Finish Advice
- Finish Help - Clear without amber tint
- favorite Wax for finishing
- Finishing question-antiqued finish
- Questions on used HVLP Conversion guns?
- Zebra wood help
- A quick question on shellac...
- "Rubbing" out poly???
- How to get a dark brown espresso finish
- How to reproduce a nearly black antique finish
- Paint question
- Raising grain problems...
- Top Coat Over Analine Dye
- Burnishing before finishing
- Spray finish school
- toner sprays
- BLO under arm-r-seal, how long to dry?
- Binks Mach 1 HVLP?
- hand rubbed oil finish
- whitewash/pickleing
- Help with Venner patch
- Spraying WB "paint"
- Finishing Beginner
- Cleaning painted cabinets for re-painting
- Which WB finish should I start with
- RE-finishing Project Rather long
- Target Ultima Brushing Varnish
- Spraying Basics
- How many coats?
- Sanding Wood Filler? (Pics Attached)
- Anyone have the HF HVLP Detail Gun?
- Mineral oil finish... spray? Dip?
- Question on drawer finishing
- Plant Stand
- Most durable finish?
- enamel as finish
- finish sanding schedule/sequence
- Lacquer
- Need some help selecting a finish
- Pre-Gloat
- 10 days to delivery -finish help
- a finish for cedar
- Poly? Urethane? Polyurethane?
- Arm-R-Seal
- Help with Lamp Finish
- finishing book/resource recommendation
- precatalized lacquer
- Cutting board finish question
- Shellac mixing table.
- Spraying shellac in cold weather?
- Finishing Birch
- Now what?
- Raising the grain?
- Homestead Finishing?
- matching old & new wood
- Sealing the ends of wood
- Bartley's Gel Varnish...
- How to finish Cherry wood.
- Best (quick) finish for wood lantern.
- Glue lines on maple plywood
- A gloat that blows
- What makes a motor explosion proof?
- Antique Brass discontinued??
- touch up spary gun and WB finishes?
- Questions on Target USL?
- Finishing Options
- Finish for Walnut & Curly Maple
- Shellac.net?
- saw dust, dye, glue ???
- Lacewood Finishing....
- Problem with dyes
- Real newbie question about different finishes?
- New Finshing Product
- Using BLO and a washcoat
- Masking French Door
- chemical storage question
- Dry Time for Latex
- "tinted" finishes
- Get your Montour going......
- can sandpaper cause fisheyes ?
- 2nd project for finishing
- Finishing area plan
- Gloves for finishing
- Finishing "HELP" please
- Arm R seal over BLO
- refinishing veneer
- What comes after the last finish coat?
- Light Fixture Locations in a Spray Booth
- Protecting a Painted Finish
- Enamel
- Why do you have to let stain dry 24hrs...
- My Secret Finish
- After BLO?
- Dying wood
- tung oil question
- finish question
- Montour Finishing Products
- Hidden Glue
- Finishing maple armoire
- Wipe on Poly?
- Exhaust fan for spray booth
- Pure Tung Oil or Polymerized Tung Oil?
- Soft, flexible Polyurethane hoses?
- Suggest a water based top coat
- Zinnser French Polish
- Water base paint???
- computerized stain mixer
- So what do you think?
- Sandpaper Types
- Open Grain Wood Filler
- Varnish/Stain - Bleeding?
- Poly over Shellac
- varnish for a finish
- Sanding Polyurethane
- Varathane and Deft, Sears
- varathane liquid plastic
- Stain question
- Refinishing birch
- Why not poly?
- WunderCote???
- Preemtive Finishing Questions
- Where is the best place to buy arm-r-seal
- HELP: Finishing Curly Cherry
- Walnut Finish
- French Country White Wash Finish
- Best Finish For An Oak Table?
- Sandpaper
- Gravity vs Pressure pot HVLP guns...
- Lacquer over Shellac?
- red cherry finish ?
- Final Sanding?
- Food safe finishes
- shellac mixing question
- Mahogany
- Tried my Wagner Gun & Target USL
- Finishing Booth
- raising "whiskers"
- Finishing a aromatic cedar chest
- Silly question about spray guns
- Coloring wax
- Dealing with polyurathane yellowing?
- making project match the house
- Painting shelves
- Finishes for Pyrography?
- Steve Mickley and Shellac
- Shellac as a Stain Retarder
- Linseed Oil
- General Finishes Pre-Stain Conditioner - When?
- mineral spirits / paint thinner
- Another Finishing Booth Idea
- clear statin poly - smoothing final coat
- Switching to Waterbourne
- Dying Wood
- Blinded by the paint , help !
- "Cherry" finish
- Dark Circles using dyes on red oak
- Finishing Bowls
- Varnish "too glossy" HELP
- Padding Shellac
- cherry sapwood coloring
- Finishing solid tops
- Waterborne Lacquer - Burning - in
- I need to spray some glitter
- Need Help with finishing!
- varnish drying time?
- Protecting painted sign
- Exterior door finish
- My SprayBooth / Zipwall
- Water-Based poly over oil
- Finishing wormy maple - help needed
- finish for hickory?
- Popping Curly/Quilted Maple
- Tung Oil/Paste wax finish
- Staining Oak black
- Woodwright Catalyzed Finish
- Oak desk "popped"
- Hvlp
- Updated Finishing Area Photo
- Bartley's Gel Varnish
- Disaster Strikes!!!! (long)
- Shellac flakes gone bad?
- Help - sweat in stain
- Olympic Gel Stain
- Lacquer-be-gone?
- shellac
- wipe on poly for kitchen use
- Magic Marker
- Stain after BLO
- How Long??
- Fuhr Evaluation
- Newbe Target water based question
- Old Solid Oak Desk
- Electric Guitar Finish
- BLO and wrinkles...Help
- Tried and True Original Finish
- Arm-R-Seal all seized up
- The more I read.... the more confused I get. Water based finishes
- Cypress, BLO,Stain Shellac
- Pre-cat replacement
- What to use here?
- Difference between satin vs gloss finishes
- Water based lacquers
- Question on BLO