- Fuji #2904 / Earlex V5000 / Wagner 2900 HVLP
- Ochre
- Fixing badly applied lacquer with polyurethane.
- Polyurethane dry/cure time
- Spindle repair and finishing
- oak treads stained brown
- Prestain acting weird on pine
- Dewaxed vs waxy shellac flake storage question
- Finishing a through-neck bass guitar
- Oil based stain incompatible with polyurethane?
- Finishing mahogany project
- Shellac and Varnish
- Alkyd Varnish vs Phenolic Varnish
- deck finish question
- Filling Blemishes in Cherry
- transtint discovery
- Paint drying question
- super sticky BLO
- poly over tung oil oops
- oil based stripper
- Pretreatment of pine wood for staining
- box over turbine help and a few qs
- How to get a Matte finish on a coffee table?
- Finishing oak stairway...bubbles in poly
- Finish then assemble or vice versa??
- concerns about humidity
- Small project finishing help
- "blending" different colors of dyes
- Need help, fast -pretty please!
- End Grain Cutting Board Finish Help Please
- paint used as dye
- EM6000 and dewaxed shellac - application question
- Sealer or something between alcohol stain and polyurethane
- Need help picking kitchen finish
- Help please Live edge Cedar dinning table
- Hardwood Flooring Finish?
- Question about walnut finish
- Filling the Grain In Red Oak bead detail
- Fnishing pine dark - Help!
- Getting started with Aniline dyes
- need help with my first finish
- Source for Really Soft Felt/ Table Pad Backing
- Not fine finishing but...
- White powder in grain after wet sanding poly
- Kunos oil finish
- staining cherry
- Mac-Lac g160 over Simpsons.
- Wipe on poly process
- Filling the grain in oak cabinets
- Finishing A Cherry Crib - Filling Cracks
- Gloss stripes in my satin poly finish
- Finishing a wooden bicycle ... spar varnish?
- Need alternative tabletop finishes in California!
- Clear Finish over India Ink....
- Shellac - finishing disaster
- "lemon" oil on top of shellac = whitening?
- Sealing MDF
- Apply Poly after Tung Oil??
- To shellac or not to shellac that is the question?
- compressor for hvlp
- Refinishing veneered doors
- Top Coat for Steam Radiator Covers
- Beeswax
- post glue up mold.... HELP!!
- dance floor finishing advice
- Milk Paint Technique
- Depth of Sheen from Shellac
- HVLP Pressure Pot Question
- Fuming and Moisture
- Kitchen Cabinet Door Cat Scratching Problem
- What to pre-finish maple plywood with
- armrseal is supposed to be easy right?
- Spraying Primer
- Refinishing the kitchen table
- Used HVLP CS9100 Capspray
- Antique Barn Finish
- Sanding a stain
- Cherry Finishing Question
- Good water based laquer?
- Oil/Varnish finish for Cherry Toychest
- SWProclassic - Alkyd Enamel v Acrylic-Alkyd
- Shellac or not to shellac before EM6000
- Help with painting kitchen cabs
- A lacquer as good as McFadden?
- water- or oil-based poly?
- How should I finish this walnut vanity?
- Magnalac
- Shellac over BLO
- Rubbing out Minwax Tung Oil finish
- Looking for a good wood filler for cherry.
- Need a Food Safe finish for Santos Rosewood
- Redwood park sign finish
- Stripping paint?
- refinishing nightmare
- leaky cedar
- Need a Flatting/Deglossing Agent
- Fumed White Oak Fading
- Cloudy clear coat.
- weathered wood finish
- Wipe-on drying between coats
- spraying polycrylic?
- Suggestions for a coffee table finish
- Confusion over Iwata specs
- Need a very durable paint finish
- finish for laser engraving
- First time finish
- Burl holes finishing?
- Having a stain made based on old one.
- HVLP issues spraying drawer/cabinet interiors?
- BLO and Thinner Storage
- Brass doorknobs
- Brushing Lacquer Cure Time
- painting outdoor furniture?
- Watco Danish Oil Not Completely Drying
- Stabilize bark
- Some finishing tips please
- Tried & True finishes, anyone try them?
- waterbase laquers help?
- floor finisher
- Water Based Varnish
- Bench Finish Recommendation
- Stain or Dye Alder?
- Water Based Oil Modified Poly from Minwax
- Best Finish to Accent Quarter Sawn White Oak?
- Additional coats of stain don't darken pine
- Maple Stain and Finishing Questions
- I don't spray......I need some advice
- toy finishes
- ArmRSeal vs tru oil
- matching stain colors
- I bought an Earlex 3500 HVLP
- Walnut Burl trim finish (heat tolerant )
- what should I use ?
- Sealing Glued/Screwed MDF Between Sheets?
- Need some advice on wipe-on poly
- Ash table finish
- Spraying Minwax Stain and Polycrylic
- Waterlox marine finish - can it be wiped on?
- Deep Penetrating Finish
- Baseball bat finish?
- Finishing inside of a dresser?
- where to buy P&L38 online?
- BLO removal problem
- Spray poly turns dull - help!
- If the price was the same, which one would you pick?
- Bar Top Finish
- a couple questions about BLO
- Best sandpapers for finishing?
- Need help - finish not drying
- Oak Burl veneer finishing
- Staining Deck with Earlex 5000 ?
- Shellac Residue
- Finishing tambour door
- problem with maple having a stain.
- How Liberon ages
- Tearout repair mid finishing
- stirring paint
- ??? regarding Target Coatings....
- HF Paint Shaker ?????????
- Antique table top.
- Herman Miller Chair
- Refinishing Conference Table
- Repainting Metal Doors
- Poly Storage
- lacquer dipping
- Removing Paint From Galvanized Steel
- Quick Lacquer Questions
- Poplar edging on birch plywood
- maple stain/dye problem.
- Harbor Freight HVLP Turbine System - First Impressions
- Poly over paint
- HVLP System Differences?
- poly over thinned shelac?
- Refinishing top of fish tank stand
- finish for a painter's box
- How to keep paint from cracking??
- Old finishing techniques
- Using Dye on Birch plywood
- Gloss issue with lacquer
- Oxalic Acid where to buy?
- Getting dark and light hickory to match
- Reclaimed vintage white pine -- finishing suggestions
- Water based stain?
- Sealing Logs For A Treehouse
- Antique veneer--cleaning/restoration advice sought
- Basic questions about finishing
- Arm-R-Seal Question
- Low scfm spray gun vs high scfm spray gun
- Waterproof finish for boxes.
- thick gloss finish for wall clock
- What do you cover orange shellac with?
- Shellac question
- BLO problem
- I'm about done with WB Lacquer
- Stupid, stupid, stupid!
- Safety glasses for finishing?
- Kremlin Airmix
- Shellac shelf life
- Cabinet shelves finish
- HVLP sprayer - the cheap kind
- Matching Stickley Cherry finish #713
- Ebonizing my beech end tables - A few questions
- Stain one piece glued to non-stained piece
- Consumer HVLP systems brands and models
- Walnut outdoor gate: BLO vs. Epifanes varnish
- Walnut sapwood??
- Reclaiming wood - stripping finish
- spraying bm waterborne impervo
- 2 part epoxy clear coats?
- EM6000 over a minwax product
- Shotgun Forend Repair Advice
- Putting a finish on Cocobolo
- Zinsser BIN thru HVLP not sticking?
- Oyster Shell as Inlay
- Transtint streaking?
- Restoring an old finish
- Jim B: your kitchen finish 8 years later?
- Finishing walnut table with pores(grain)
- Bubbles and Blisters in Topcoat
- what's so bad about bleeding stain?
- Will bleaching prevent pine from yellowing?
- inbetween coats rub for poly
- White specs in lacquer finish
- Matching Ash to Oak
- Anybody have experience brushing lacquer
- What to do with the last coat?
- Finishing a Parota Slab
- Ordering from Shellac shack.com - Great CS!!!
- Miniwax finishing wax
- BLO and exotics
- Spray Booth: Design for Fume Exhaust or Overspray?
- Iron Buff - Jeff Jewitt
- What Size for spray booth?
- Behr Classic Oil Stains Disappearing?
- Shellac question?
- Minwax water based oil modified polyurethane
- Raised Panel Door Stain & Finish
- Finish for Pommele Sapele?
- How many coats of Polyurethane
- Best Deck Finish
- Charles Neil blotch control
- Rubbing olive oil in the finish
- Temp Spray Booth/Explosion Proof Fan?
- General Finishes High Performance Polyurethane Water Based Top Coat
- Wood is soaking it up
- Finish for Padauk (or is it Paduk)?
- New URL for What is that finish?
- Hazards of spraying shellac
- Spraying oil based paint question
- For anyone having trouble with dissolving shellac