- Which book for finishing
- Smooth, Glossy Finish Using Spray Paint (can)
- Varnish Washcoat Too Thin?
- Project Rescue!
- Quilted Cherry
- HVLP vs bigger aircompressor
- Tried and True ?
- Pros: Do you finish your stuff yourself?
- M.L. Campbell
- Ready to throw in the towel (Coffee table finish) need help
- refinishing kitchen cabinets
- HVLP spraying - compressor hose setup
- Finishing DVDs?
- Preparing Raised Panels for finish
- Rubbing Compound On Wood?
- Mahogany Finishing Questions
- HVLP System
- Big curious bird+cabinets
- When to Wax??
- Gloves for finishing
- Poor man's spray gun
- Sikkens Cetol SRD
- Rubbing Out Varnish Question
- Unique Oak Finish
- Getting the Weathered/Aged Look?
- Darken Danish Oil on Oak
- Mixing brands of finish....
- Coloring ash....
- Proper steps for finishing drawers
- Hvlp conversion guns and air compressor
- Varnish problem - Crater or Fish Eyes
- Advice needed
- Questions on Finishing method for QS White Oak...
- Maple finishing project in need?
- Anybody Use Titan HVLP Systems
- Shellac rub out method sought HELP!
- Earlex 3000 opinion
- Now that it is 2008, what's your best airless paint sprayer?
- Laser engraved box finish peeling off - help
- Using Newspaper to Burnish
- Water Borne Finish Recommendation
- Trouble with Final Coat of Shellac
- HVLP CapSpray 9100 question
- New (to me) HVLP System
- Urethane right over BLO?
- Watco Danish Oil and Satin Wax finishes for Stair rail
- Spray Gun Lube?
- I need an exterior finish for Mahogany
- Workbench top oil reaction??
- Clear finish/sealer over lacquer?
- How to (cheaply) label a project?
- after epoxy on paddle
- Hot hide glue pore filler?
- Finish for MDF Ping Pong table top
- Earlex 5000 Vs Fugi Mini-mite 2904#
- Built Bar - Ready to Finish Need Recommendations
- How long to wait before buffing out shellac?
- Finish ideas for an aquarium stand...
- How to paint a Piano?
- Lacquer for Ping Pong top
- Old Shellac rebirth!!
- Mixing the finish for my new workbench
- Varathane stain any good?
- OSB finish option for speaker...
- Stained Mahogany door needs refinishing advice
- Pink wood
- Curly Maple Dying Problem
- Bathroom Vanity Finish
- Paint Thinner Vs. Mineral Spirits
- Nuther OSB finish question
- Windsor Chair Finish
- Polyurethane suddenly turns gummy on kitchen table?
- Need advice on finishing a veneer cocobolo coffee table top
- Where to get 100% tung oil and general finishes arm-r-seal?
- Polymerized Tung Oil and Shellac
- Finish for Urns?
- fine finish tips /w airless
- Will Dye Bleed?
- cherry, tanning, & BLO
- First time shellac user - question.
- Exterior bartop question
- Quick question about finish on figured maple.
- Help! I am out of t-shirts!!!
- How to do little bits of veneer in inlay work?
- Pouring Stain?
- Polyester Finish
- Staining solid maple and ply to match on medicine cabinet...
- Will kiln dried pine bleed sap?
- tung oil my first try
- Vanity Finishing approach
- Poor Man's Waterlox
- Red oak chair clear finish
- Finishing Rubber Tree Wood - Input Needed
- Where to find Oxalic Acid?
- Sealing ceramic tiles on outdoor table
- advice/help needed for an HVLP system
- Shellac before spraying toner?
- walnut baby crib
- black walnut kitchen island
- Lacquer over oil finish?
- How to finish a red oak table top
- Air compressor water trap
- Finishing Red Cedar Turning
- Arm-r Seal topcoat
- Water based poly in a bathroom?
- Finishing Wenge
- Uh Oh! Can I fix it?
- Question: Steelwool & Poly & HVLP From A Beginner
- Paint issue on shelving unit
- How to make the "Rough Cut" of sawmilled lumber STAND OUT
- Target uSL
- Cabot SPF on deck-Need Feedback Please
- Ok finish for African Mahogany?
- mahogony finish need filler?
- Spraying lacquer
- Best finish for Doug. Fir Cabs
- Newbie Lacquer Spray Question
- Finishing raised-panel doors
- waterborne clear finishes
- Finishing relief carving
- Furniture Finishing
- New to lacquer and finishing in general
- BLO and string banding
- need advise on baby crib finishing
- Do I have a problem????
- What is pre-catalyzed lacquer?
- xylol is nasty
- Paste Wax Question
- Help... Varnish Oil not drying
- Home Brew Danish Oil
- Buying Finish online?
- african mahogany Finish round two.
- BLO/shellac
- what to finish old pine toy with?
- Gel stain over waterlox??
- Can mix own BLO/Tung/Poly blend
- What topcoat is compatible with Target's Oxford Grain Filler?
- Cutlery Divider...
- Problem with finish (PIC)
- Removing DO/ Polyurethane
- leopardwood(lacewood)..what finish?
- need to dye a wood bright yellow
- Lacquer question
- mohogany plant stand-finish
- Lacquer over Shellac
- Rubbing out Poly?
- Finishing a white oak mantle clock
- finishing VG fir doors
- Partial grain filling of sapele veneer
- What finish to use?
- MDF Help
- Spar urethane finish question
- Which Type of Finishing System??
- Tack Cloth
- Now what?
- BLO Question
- Finishing teak
- Tried some Seal Coat last week.
- Painting Furniture
- BLO on chainsaw carving
- Refinishing an oak entry door
- Food Grade finish question...BLO???
- Paint stripping ???
- Im sure ya'll would know
- Spraying Target USL with Wagner Conv. Gun
- How to make figure pop with natural look? W/Pic of figured Maple to be finished.
- Can I spray finish with ...
- Which Paint on HF HVLP setup
- wiping urethane
- Blisters in lacquer finish
- Home trim finish schedule suggestions (Knotty Alder)
- repair wood table dilemma
- Fix my mess?!
- Best finish for knotty pine?
- Final coat over sprayed shellac???
- Use of Bush Oil
- Advice on spray finish for umbrella stand
- Introduction & recommendations for this...
- Spraying Polyurethane...
- RE: Varnish Problems
- Benjamin Moore Waterborne Satin Impervo Enamel 314
- Wenge
- Turbine or Conversion Gun
- Finishing a Red Oak Writing Desk
- need help finding a good brush for shellac
- Protecting signature on outdoor project
- Trouble finishing Cocobolo
- Covering hairline joinery "seam"
- 40 y.o.redwood deck now for tables
- Which Target Coatings product for milk paint on kitchen cabinets
- How to remove residue dresser
- reducing grain appearence
- Finish for Black Walnut
- Makore Crotch Wood Finishing Tips??
- question about clear poured epoxy or other clear filler
- Target USL Question
- Thinning Latex Gliidden
- BLO on Cherry
- Finishing my first project
- Lacquer vs. polyurethane
- BLO cherry & sand through (I know but...)
- Danish Oil needs top coat??
- Waterlox
- Anyone recommend a good stripper?
- Black stain
- no dark colors in ProClassic or Empervo
- Ebonizing Cherry?
- Help on Shellac Flakes
- Waterlox problem
- BLO on outdoor furniture?
- Finishing with string inlay
- Mineral oil vs Tung Oil
- Question about my sprayed on finish?
- Pouring from a 5 Gal can. ?????
- BLO and Glue
- Wipe on: Poly-U, JAPAN, & Tung oil
- Top coat for a coffee table
- Waterlox alternative?
- ? on Watco Danish Oil
- Granite or stone look
- Newbie spray finishing question
- Need to darken a cherry finish.
- Spraying Lacquer over Danish oil finish
- Water based Poly over Linseed Oil
- where can I buy posstassium dichromate?
- Anyone using Pittsburgh Paints?
- Wipe on poly question
- Staining and Finishing a Mahogany entry door
- Kitchen Cabinet Finishes... Please help...
- Can I apply finish to melamine edge banding??
- Using Dye
- attaching and finishing end panels
- Cherry & Blotching
- Outdoor/cypress finishing...
- darkening maple with watco, suggestions
- stain beech butcherblock Different Finishes for the Beech Butcherblock
- Staining and glue question
- Poly over Scorch
- matching finish for 1926 model-t
- Interesting finishing question
- Single Coat OK?
- Finish for Red Oak Barstools
- expert opinion - finish life?
- WunderCote
- How not to scratch the finish
- Wipe On Rockler Gel
- Making Curly Maple 'Pop'
- Seeking Bob Flexner (or) When is a Wiping Varnish not a Wiping Varnish?
- Ran out of USL
- Help with finishing Beech Butcherblock Tabletop