- Blue Pine bowl
- Good sources for sanding disks and backing pads?
- Knob or finial? Geometric poplar box...design considerations
- Jet 1642 Banjo/ Oneway Replacement
- UV activated plastic glue
- Thickness caliper pattern
- Baltic Birch Chalice and Paten
- Link belt on reeves drive
- Anchorseal cleanup
- Is there such a thing as a low-dust lathe shop.
- turning supplies and gouges etc.
- Oregon Myrtle footed platter.
- Dark streaks in cherry
- Hollowing tool information needed
- George's Telescope - Consolidated Threads
- on a pedestal
- Set of wine glasses
- Powermatic 90? Worth it?
- "Morning Glory"
- Dark Side of the Moon - Completed
- Low viscosity epoxy
- Beall Buff and CDs/DVDs
- A Staining Lesson the Hard Way
- "Dragon Teapot"
- Bark Pocket Maple Burl Bowl
- Going to talk to Grizzly tomorrow and need advice
- Anyone turned cypress
- How close to the wall is your lathe?
- Heart Pine
- Bradford Pear
- Ieon wood (Hornbean tree)
- good answer to the perennial question
- "Outside the Fire"
- Good bench Grinder For Sharpening Tools
- Your sandpaper holder…
- What to do with burl
- Have you ever noticed…?
- Preserving Waterlox
- Offset Embellishments with Cherry Sphere
- Question about dying (transtint dye)
- "Salmon the Life Cycle"
- What size scraper?
- Ryobi detail sander
- Silver Maple in West Central Illinois
- Old Sears lathe.
- PSI Tempest Cyclone
- Bowls from KD stock
- Bandsaw Riser Kit
- Recommended Sources for Round Carbide Cutters
- Is it possible?
- What to use for practice?
- Eccentric Sphere Chuck
- Tell me about vacuum chucks and chucks
- Finally Unwrapped My Christmas Present
- Design opinions please
- Finish question
- Gizmo has Arrived
- "Recovered Ruins XXX"
- Not much, but my first try at turning
- Must be a heck of a bowl gouge
- Douglas Fir
- Keeping bandsaw blade clean?
- Southern California sources for 8/4 Curly Maple?
- Help With Revolving Live Center
- Do you use dust collection when cutting green wood on your band saw?
- Dye question
- Transparent wood
- 10" cherry crotch bowl
- Handles - Lots of Handles
- Where do you mount your tool rack for minimum dust and curlies?
- Shorter legs on the newer G0766"s?
- My first live edge bowl.
- Shelf-life of General Finishes Salad Bowl Finish
- Harbor Freights 12-inch-x-33-3-8 -vs- JWL-1221VS
- upgrading from rikon mini lathe to full size
- turning cedar
- Laguna Revo 1836
- Wood ID Help
- Dilemma for a new turner: cheap used Jet 1220 v. new (on sale) Jet 1221VS lathe
- Asian lathe Manufacturers and profit markups
- Hollow form of Figured Redwood
- Beech Hat
- Mille Strati
- update on nova 1624
- Looking forward to Ipe turning experiment
- Creeker Visit
- Applewood bowl
- And another Applewood bowl
- I made some new Bowl shaped things!
- More Cherry!
- Last One I think
- Turners Firewood
- Apple bowl again
- flute master jig
- looking for your preference on form
- Ambrosia maple
- "Scrap" platter
- Question for Bionic face shield users
- help on nova 1624
- Anchorseal Penetration
- Orphan
- AAW 2015 video
- Burn lines on face of platter?
- Daily Report: AAW Atlanta Symposium
- Sawtooth Oak-- Any good for Turning?
- Delta 48-541s - Good choice?
- Deep Glass finishing with Wipe-on Poly
- Getting ready to try to turn my first bowl and have questions
- Coral Tree wood?
- Faceplate Scew size/length
- Powermatic Model 45 & Model 90?
- Electric/Battery Chainsaw Reccomendations?
- Quick check of a Sanding Drill
- Pro Trend Airshield and Tenergy...
- Chain saw in the shop - wood holding solutions?
- What Bowl Gouge Size??
- Red Maple Bowl
- spindle gouge as a scraper
- Anticipated lathe purchase fizzled (:
- Black Walnut bowl with a knot and overhanging rim
- Powermatic 45 or 3520A?
- How is the grizzly g0766 holding up?
- Ambrosia Maple - like or not
- CBN Wheel -- 1 or 2?
- VOTE! Need opinions on taking advantage of this Elm crotch for bowl blanks...
- How much ballast
- AAW Symposium/POP Instant Gallery award
- Oregon CS1500 Electric Chainsaw -- First Impressions -- Impressive Value!
- Possible Overlooked Safety Concern?
- AAW Symposium, and a Major Gloat - new Stratos 230 Lathe
- Truing green bowl blanks
- CBN wheels and Trend Lapping fluid
- bowl finish
- Yeah! The Powermatic 3520A works. But questions??
- Using Magnets to control grinding dust
- Starter set of chisels, gouges, etc. for newb?
- Nova 1624 EVS Upgrade
- No amount of tooling will substitute for good technique. Agree or disagree.
- Going to Spokane to take a class
- Vases
- Hollowing systems revisit
- AAW woodturning video site
- To Hone or not to Hone?
- Leaning toward Hurricane wood turning tools but skeptical
- A Bit Different Style for me (Piercing)
- Fallen Elm Crotch Bowl 1
- burnishing
- 3m airstream replacement battery
- Got the lathe and some turning tools. What else?
- Fluted Cherry Vase Project
- Why not 10" grinding wheels?
- Fallen Elm Bowl Number 2
- SWAT Demo Rotation Schedule now on line
- Creating spalting
- Stihl 290
- Favorite Videos?
- Need a bowl scraper recommendation
- Finding the cut - Thompson gouge
- Vicmarc chucks - no set screw?
- On Bench Grinder Speeds
- On Safety - It's my understanding that ...
- Coring and roughing session today
- threading jig
- Belt grinder belts
- It's bark is worse than it's blight! (Cherry burl.)
- What Tools are Needed to Make Segmented Ring Tubes
- Does anyone know of good sites to build marble runs?
- Help identifying piece of wood
- What is this tool.called
- What's with hollow forms...?
- Where to find wood for turning?
- Walnut rough outs into the kiln
- Sanding disks
- Smoker turned into bowl-drying kiln
- Have experience with finishing cottonwood? Dry spots are forming on my bow!?!
- Turned a bowl today
- Rough turning urns
- Got Bug Poop?
- Handle adapters
- wood ID help
- Couple of new ones.
- Demagnetize turning tools
- Octagon Rim
- turning elm
- Maple stump bowl
- Lightning (Lichtenburg) Pyrography
- Jr gent pen kit
- Dust Curtain Recommendation
- Friendly way to seal Punky Wood?
- Saw for Cutting Segments
- Thinking out loud about bench grinders
- Three Vases
- Segmented glueup I found at garage sale
- Osage Orange?
- Wet sanding questions
- burl cutting question
- Need new PAPR - where to try 3M Airstream?
- JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe
- Need Advice On Making Spinning Tops
- variturn Classic lathe
- Big Black Walnut Logs
- Pesky Burr
- Oneway Stronghold Serrated or Smooth Jaws??
- My first Calabash
- tool rests
- Treadle Lathe
- burl bowl turning problem
- Intro to CBN wheels - a few questions
- Vega lathe
- Another CBN and Wolverine Jig question
- 2 bowls from this weekend
- Begining My Woodturning Journey
- Looking for recommendations for a respirator.
- Sharpening bandsaw blades in the shop
- Turning Port Orford Cedar.
- "Campbell's Hands on Retreat"
- Adaptor size
- 1st time with a recess
- Newb first attempt not so good
- Sharpening bandsaw blades - Steven Russell
- Pushing a quarter ton up a hill
- Returning Bigger Warped Bowls
- Day Two Woodturning Beads
- Is this Osage Orange?
- PM 3520B VFD powered when plugged in?
- Caution - Check Chuck Jaw Screws
- Removing Nub in Bottom of Goblet
- Looking for a lathe
- How well do segmented bowls stand the test of time......?
- Rockwell 46-200 series lathe -- decipher picture!
- Thompson 1/2 V John Jordan
- Tip for HF mini users
- new stuff
- First Goblet
- Visit to Woodworkers Emporium
- Stuart Batty Skew
- Sherwin Williams Emerald Highly Reflective White for Turning area
- spanish cedar turning blank?
- Easy Pro Thread Cutting Jig.
- Wide Rim Maple Burl Bowl
- Couldn't pass this up
- Shallow Soft Maple Burl Bowl
- Alan Batty's passing
- Ready to take the Thompson plunge
- Cherry bowl
- Robust Comfort Tool Rest vs Low Profile Tool Rest
- DFW (Dallas/FortWorth) pen turners (need a contact to buy some gifts)
- Walnut and MAPLE VASE
- Red Maple bowl
- Ambrosia maple - finished