- ShopSmith as Lathe- What are the specific weaknesses?
- My Chalice Finally!
- Cherry Burl Vase
- The resiult of turning large bowls
- Lacebark Elm Wood Help
- Drying Sugar Maple Crotch
- Lathe Speed and WOP
- What size Chuck
- What is a French Polish technique on a lathe?
- Used Jet 1014VS or New Nova II with Chuck
- What North American-Made Lathes (new) are Available Now?
- Using a scraper properly
- Turning Bald Cypress
- Bowls got sticky in storage
- Large bowls/platters, 10% rule still apply?
- Newbie question about old lathe and face plates
- gloss finish on lathe
- drying kiln
- Old Growth Pine ... Vases
- Decorative Bowls - My Pyromaniac side got the best of me
- Pet Urns - side by side lacquer and tung oil
- McNaughton Coring Question
- Need some help with this blank
- Sweet Gum Hat
- Maple lidded bowl
- Norfolk Pine
- Safe wood
- Oneway Coring System
- Grizzly G0766 - Dilemma
- (Another) Cottonwood Crotch Platter
- Pittsburgh Symposium Trade Show Exhibitors
- Grizzly T108 series chucks
- Jerry Marcantel, Chuck Plate
- How dry should it be?
- My first turning (firewood bowl, a year in the making)
- Soaking Wood In Water
- any advice on tenons?
- G0766 Arrived and Set Up-- No issues
- Leaving finish in sprayer
- Frugal Vacuum Chuck
- Does anyone have personal experience with Grizzly 5.5" chuck?
- Never underestimate the after sales from shows.
- Other Turning Stuff
- texturing tool or chatter tool
- Truing recess tenon
- Any advice on a particular brand of geometry of CBN wheels? Trying one more time.
- Nova 1624-44 motor problem?
- Weed Pots and a Mushroom
- Laminated Chalice experiments
- What puts the curl in curly maple?
- Everything I need to know about Carpathian walnut...Cause there is lots coming
- Sort of a wood turning thread: shavings as mulch?
- Hollowing options
- Dyed Box Elder Container
- This won't work, right?
- G0766 - Sounds
- Bowl halves
- holding work while slowly spinning.
- My first “knitting bowl” made from an old Black Cherry bowl.
- Acer Negundo or Manitoba Maple AKA Box Elder ;-^))
- Question about the G0766 lathe.
- Symposium Pictures
- Third batch of G0766`s Shipping possibly this week!!
- Woodenwonders stx
- Black Walnut bowl with feather, just over 14"
- Locknut -G0766
- Symposium Pictures II
- Help with wood ID
- Soaking Logs in Water Follow-Up
- oneway 2436 headstock and tailstock aren't precisely lined up
- Grizzly 12/18 10/18 variable speed lathe
- Symposium Verion 3
- Couple Pics for Tom Sturgill
- 6" Scotch Pine pepper mill
- Anyone have photos from "Design in Wood" at San Diego Fair?
- A little weed pot.
- New (old) Lathe
- Ask me why I am so happy
- "Design in Wood" Entry Level Curiosity
- Craftsman Lathe will not start???
- Has anyone turned Southern California Jacaranda?
- Mesquite Wood Score; Need Some Advice On The Best Way To Cut For Bowls
- Need help---- delta lathe just stopped
- McNaughton Saves The Day
- Green Bowls
- Chuck and Jaws Recommendations
- Mulberry Vases
- 24 Hour Turnaround
- Tormek gouge jig on regular grinder?
- pen blank horizontal drilling jig for shopsmith
- Chuck / Jaws application
- Hurricane Tools
- Getting a high gloss finish on things you can't finish on the lathe
- More G0766's On The Way!
- Drying Wet Spalted Rough-turned Blanks
- Maple and Walnut
- Question about Turning wet wood using the 10% rule
- Anchor seal question
- Bulldog Chuck
- Fresh cut carrotwood
- Coolibah Burl Turning #4
- Beads of Courage
- G0766 - Banjo upgrade experiment
- Which size gouge for 'bottom of the bowl' standard grind?
- Craftsman Lathe Tool Rest
- bowl bottom gouge grind
- Question about using white glue to stabilize
- Black Ash bowl 10” X 2"
- Been a while. Latest turning...
- Spindle Vs Bowl Lathes
- Has anyone turned a chalice with green wood?
- Tool Rest Advice Sought
- A few other recent turnings…
- The tool rest and other stories...
- Fern Pine: Podocarpus gracilior
- HELP! Jet 1642 not working
- Banjo Nirvana........G0766
- Small Tool Caddy
- Turned, carved and pierced wood vessels
- Dealing with Great Vendors and with sloppy companies.
- A nice piece of timber
- New tool Rack
- What do you turn that's "different"?
- Wiring diagram for Delta 46-460
- Vicmarc VM120 Chuck question
- Green Bowls: Leave the Tenon?
- Why is this so difficult...?
- Thank you Reed Grey
- A point about swing over top of the banjo - G0766 and other lathes
- Some seggy cut turnings.
- 10” X 4” Teakwood bowl
- Happy Birthday Wally !!!
- Any Lathe Guru could help ?
- tool Rest
- Vacuum Chucks for an old lathe
- Learning the laser
- Turned a large hollow form on the new lathe
- Workbench vise Pen press
- Is superglue food safe???
- American Chestnut
- Grizzly G0766 Projects
- coffee mug
- Ordering a Robust American Beauty!
- Testing the 0766 - heavy, unbalanced and hard just for the fun of it!
- New to the wood turning forum and wood turning
- Powermatic 3520B set screw question
- left hand threaded face plate for 1" - 8 tpi - or tap?
- Fern Pine / African Yellowwood chalice
- Tormek equivalent wet sharpening for wood turning tools
- Poll - what angle do you have on your favorite bowl gouge?
- The finishing touch
- Octagonal Pommele Sapele Stash Box 9" x 4"
- Asking again about the Grizzly G)632 Lathe
- Bowl rest
- Burt Group
- 10.5" Sapele square bowl w/ feet & lid
- Advice on an antique lathe
- African Yellowwood Bowl
- 12" teak fiesta bowl
- Two Small Vases of Seaside Mahoe
- My Homemade Brute Captive Hollower
- More of the Seaside Mahoe
- Production Run of Communion Sets and Pitcher and Bowl Sets.
- Been Spindle turning Candle bases
- Couple of walnut pieces
- Noobie's First Pieces
- New to HF Turning - Going Deeper into the Vortex!
- Sorby Tools - Are They All HSS?
- 9" x 4" Walnut Bowl Step by Step
- How many centers do you use in your headstock?
- Delta 46-700
- Weekend Scrap-wood Turning Challenge
- Cutter Vision by JT Turning
- Hollow Forms - Green wood or dried wood?
- Lacquer?
- What kind of wood is this
- Most secure mounting for End Grain hollow form?
- Glaser Synergy Ultra Gouge
- Robust AB Wheel Kit?
- Bowl From A Board
- Anyone ever used one of these?
- Sometimes turning comes easy
- Aurora Borealis
- Alchemy 101
- Nova DVR XP "hardware failure"
- And now for turning art from another culture with unique tools.
- Help with wood id
- Full size communion sets
- Yellowwood tree
- Wax recommendations
- Led spotlight in my moffit lamb
- Maple & Walnut
- open top steady rest comming along
- Dust Collection at the Lathe
- CBN wheel on Tormek?
- Powermatic Lathe - Is this a reasonably good deal
- Peppermill
- Long Tall Sally
- wood identification help please
- Yet another 'which lathe?' thread...
- Nova G3 chuck....for smaller turnings....pin chuck jaws or 35mm spigot jaws??
- Wolverine jig with 10" grinder?
- Need a good turning apron that is long enough. What do you use?
- faceplate removal tool
- Frequency of sharpening your gouges
- Making a Wooden Vessel Water resistant
- Turning Wood with Metal Lathe
- I Got My Grizzly 633
- Finding balance Off center bowl turning
- spanner wrench
- Art show entries....
- Traveling to Columbus
- Need help with wood id
- 10" cigar canister
- Oneway 20" banjo
- Old Craftsman HSS vs. New Chinese HSS
- Lathe Identification
- Elm Hollow Form - nothing fancy, just pretty wood
- Nova Dvr Xp issues
- cedar cracking after sanding
- Drilling out a Grizzly banjo for 1" tool post
- 11" Sapele inlay Sun Tray
- Robust Lathe Handwheel.....
- Aurora with Moon Over Mountains out of Douglas Fir
- Diamond shaped parting tools
- New lathe help.
- 11.5 Teak Bowl
- Pierced Aspen HF
- "A Shot of Nothing" pierced mini
- Maple HF with finial
- Drying ash for handles
- Bottle Stoppers
- Whats the best lathe for...
- Gluten Free label on a chalice and plate
- Baltic birch for sacrificial block
- 10" White Oak Bowl
- Beetle Kill Pine nested bowls courtesy of Doug Herzberg
- I hate it when that happens…
- Large auger bits
- Recent game calls
- Past calls
- Next Powermatic Sale?
- Yarn ball holders
- Trip to California
- Any Metal Spinners out there?
- 1x8tpi to 1-1/4x8 tpi adapter source?
- Rhus Lancea AKA African Sumac is it Good For Turning
- Just another Sapele bowl
- Jet 1220VS or wait?
- Cherry pitcher and goblet