Harvey HW110S Cabinet Saw

Page 1 of 2 12 LastLast
Review of the HW110S-36 with sliding table
  1. Complete!
  2. Hand built drawers
  3. A look at the router table extension
  4. Owner installed 1/4-20 screw and hex nut and factory supplied Allen screw & square nut for attaching the slider fence to the carriage.
  5. Fence slot and square nut leave too much slop causing the nut to jam.
  6. Miter gauge and overarm dust shield storage
  7. Slider fence storage
  8. Upgraded the 4" to 6"
  9. Added another 4" port
  10. Electrical routed to rear with 120v and 240v cords secured to the dust hose
  11. That's all the door opens once the overarm tubing is installed.
  12. 8' from side to side
  13. Sliding legs secured to the mobile base.
  14. Gotta cut the rail
  15. Anodized insert
  16. The Harvey has landed
  17. TECF 4HP motor
  18. Step 2
  19. Step 3
  20. Sliding table
  21. Step 1 in getting it down
  22. Off the big blue pallet
  23. Portamate 3550 mobile base
  24. Overarm dust collection
  25. Included with the saw
Showing photos 1 to 25 of 27
Page 1 of 2 12 LastLast