Cedar Sign w/LED Backlit Epoxy Resin Inlay

  1. Finished and mounted closeup

  2. Finished and mounted

  3. JVR NearFinished lightsOn

  4. Mounted to a temporary fixture that allowed me to test the french cleat

  5. VarnishCracking2 - Epifanes Clear Gloss Spar varnish thinned 25% with mineral spirits began to crack after initial application over the seal coat of...

  6. VarnishCracking

  7. Epoxy Sealer, second coat just applied. Needs 2 - 4 days to fully cure.

  8. JVR Sign before sealing coat of epoxy

  9. Preliminary routing out of the mountainscape image

  10. Positioning the logo

  11. jvrSign

  12. After second pour
Showing photos 1 to 12 of 12