Activity Stream

I agree with Kyle. What's your budget? Is swing important to you? I went with the Grizzly G0766 simply because I didn't want to spend top tier...

Grizzly has discontinued several tools. It could be it has always happened and since they were tools that I didn't pay attention to I didn't notice....

I've done the same with my backhoe. But stay safe and make sure there's nothing dead or broken in the canopy. Otherwise it can come down on top of...

Good to know and thanks for the suggestions, John. Tim

It's an interesting chart but if you're buying firewood you get what they give you. Often it's a wood that has little value. Around here that would...

I love my Magport fittings, with two main drops that service about 7 different machines, it make switch over so easy.

Mine ended up in my bank account just when they said it would. I don't need it so I'll spend it just like I spent the last one. Right now spending...

I've also just recently seen the Matchfit system- they are advertising heavily on Instagram. The use of an adjustable height sit stand table is...

The weak point of the Onefinity is the controller. It's not a bad controller but it's also not as good as it could be. Since 1F doesn't make it...

BEWARE... do not know your location... in Virginia if you use without explicit permission land for 15 years, you can claim ownership of the land...

Most have more features and capability but also it holds more value when sold.

Tom, Thanks, PM sent. ken

If you want more photos in one post and have an image editing program you can make a composite image that contains more than one photo and it only...

i have the oshlun 8 inch set that amazon sells,,,when i first got the set i didnt use it for about 2 months and the very first time i used it it was...

I'd get an Indoor Bike Trainer Stand and a low cost bike. I used one for years in the winter. On nice days you can ride outside. Overall the exercise...

Onefinity actually looks a little better than Shapeoko, except it's back ordered 3 months, and the company is only about a year old. The machine...

I would swap / reverse the two. , top fronts so that the taller one is third from the bottom. This will necessitate moving the top drawer runners...

I, too, am looking for a saw. In terms of Sawstop, someone said their patent expires this year. If true, then you know Papa Griz is waiting to...

Spending limit is the key missing piece of info here. You can get less than good lathes for cheap. I'd love a Robust, but can't afford one. I...

My house has 24" eaves. However, someone built a bay all the way to the edge of the eaves. I replaced the siding six years ago and I have mold...

My mom lost about a acre, because she didn't have her property surveyed before she bought it. It was supposedly in the previous family for over 100...

That is what I was thinking. Plain seamless gutters don't cost all that much. I don't think the cost difference between hardscaping with the pipe,...

Thanks for the ideas, guys. I probably wasn't clear; I used the jointer for this because I'd never done it before and wanted to see how well it would...

Happy with my Laguna 18/36. Option to add a 12" swing away extension or a 20" extension. I have 2 other Laguna machines and happy with them all.

Since ‘reasonable’ may be merely a memory, there is that old saying, “Good fences make good neighbors.” Failing that, there are signs that say “If...

Had to go the kitchen to get a paper towel to clean up the drool from my laptop. Equipment like this inspires you to perform some great work.

The side of the cabinet is the sheet metal skin. By the time I fiddle with making it work (reinforcements, brackets, etc), I would have less time...