Activity Stream

The grass tiomos series hinges have three adjustable self closing force settings which makes it easy to compensate for door size and weight. I...

I picked wild Blackberries. I got enough berries for a small pie, and enough ticks for a large casserole. Those blueberries are lovely! We hope to...

I just received an invite to join Capital One Shopping too. I have not joined or read up on it yet. I suspect one catch will be getting advertising...

I'm not attacking the moderators. They do a good job. I'm sure there was probably a discussion held behind the scenes about the thread. I have been...

Any movement of the wood can be handled by making a slot in the support so the lag screw can move if the top expands or contracts. For me having...

Just my $0.02 Alex, but I would put the Tormek low on the priority list of your tooling up process, unless you have a non-turning reason to own it. ...

Could you describe what you see as "the issue at hand"? Is it that the screw can only go in so far or is the post with the threads buggered. My...

Find something besides lithium. It's in process now, sodium is one candidate. Down one on the periodic table from lithium. Nobody is going to corner...

Would they if they could? That may be answered by looking back at what they could do. In the 18th and early 19th woodworkers used wooden planes....

I'd likely pull the trim and put in additional shims/blocking to stabilize the structure. That and insure that the proper type and length of screws...

Go newer if you can...2019-2020 Intel based. Better performance and longer "OS life" left. Check Apple.com for refurbs. OWC also sells reconditioned...

Keep in mind that some formats of clamps designed to be used with MFT-type surfaces are not friendly to the thicker tops. You might consider putting...

Alex, I can appreciate your concern. The thing is that a lot of folks who are using these cordless tools now have more than enough batteries to...

Here’s mine…washita (in custom box made by Rafael Herrera), oil, strop. Pretty basic. (I have more stuff, just wanted to show Rafael’s oil stone box!)

Actually, from a market tier perspective, it does make a little sense. "Relatively speaking" a huge majority of folks (at least in the US) cannot get...

I would kill (figuratively) for a shop area the size of a two car garage. By basement corner shop requires everything but the bench be on wheels....

I used to ride around with local buddys, they had a driving game that started at the Snoddy's store gas pump where every one filled up, followed by a...

The dog is a big fan. It’s amazing how much the water sounds affect the overall vibe, super calming.

Jay, Is that a block wall? You could remove the strike for the lower door knob, open up the 7/8 bolt hole and use a grout bag to squeeze in some non...

Right you are, but would they if they could? Thanks for the thanks, I don't get much time to answer blogs etc. I have been making the occasional...

Just to clarify, by “inward,” I meant toward the frame.

I drove a Lamborghini once, and you could literally see the gas gauge going down as you drove. I'm trying to remember the car (maybe a Bugatti)...

Sadly I learned that. But I just have a hard time believing there is much of a difference in units between their Wifi 6 mesh router and Wifi 6E mesh...

The Great Stuff Pro foam gun comes with plastic reducer tips that are about 3/16. You can squirt foam into a screw hole and replace the screw without...

Also, go over to the workshops sub forum for lots more advice. Much of it is repetitive, but I ended up reading many of the posts for several years...

+1000. I have a MLCS cast iron router table top, and although it's extremely solid, I really, really wish that it provided more room in front of the...

Agree with most comments above. I built my 1200 sq ft shop four years ago, and added a basement pretty much right before we started excavating. Good...

I must've missed the post in question. But I"d like to respectfully inject a couple comments on the Moderators here. Please know that I mean no...