Activity Stream

Very clever design. I may have “borrow” it, too. Thank you for sharing your work.

I like it, especially the continuous grain on the drawer fronts.

Thanks Bob. The idea about the position of the screw holes in relation to the dog holes is an interesting idea. Much appreciated.

I would not run climb cut with the real profile cutter. But a climb cut made on the still square stock that rounds the corners ,and more if...

You are correct. Thin passes on the planer and final planing with a hand plane. Sometimes belt sander with figured mahogany that I work with a lot....

Thanks David. That is what I had been thinking too. The screws ought to apply enough clamping force.

Thanks Jim. I don't know what search term would have raised that up but I'll continue to do my best to locate it. I suspect you are right about the...

And a closer view of the back side of the vise leg with the side stretcher coming in from above. I don't like it.

If you do a lot of HD streaming you'll find that 3Mbs down is pretty slow. Multiply that by multiple TVs and it is really an issue. Working...

The two pictures I posted of the vise leg yesterday were taken yesterday. I looked at a few pics from Jan 2019 in my phone, edited them to upload...

I am more than confident finishing both sides is no guarantee against bowing :-( so don't rely on it. That said, you're using a very stable wood,...

I clearly live in a different world. I have worked for years with 3Mbs down and 1Mbs up. That's recently improved to about 6Mbs down. Not sure...

Very nice Dale. The wood combo is great, as is the workmanship. Creative idea that I may have to "borrow".

LOL. That's why I never go to those sites.

I appreciate all the advice. I'm currently digesting it all while reading up on veneering, and trying to decide exactly what to do. It seems like...

just went through this with the same with my LTX. Friend sent me replacement battery sites and said best bet. I thought about it a bit and went and...

I'd be getting back to him ASAP:rolleyes:

How are you purging the air? The best way is to hook a hose up to it and run each zone individually at the buildings water supply pressure. Running...

The foil covered roof sheathing really works but it attracts lightening and current flows across it causing fires. The paint is not as good but...

In theory a radiant barrier should work, and they were all the rage about 15-20 years ago. I think what they found out was that once the radiant...

I did all of the trim work in my last house using vertical grain fir. It can be beautiful stuff. If it's as dry as mentioned, I wouldn't anticipate...

Sold! Thanks, Doug. I will get them in the mail tomorrow.

Upflow ceiling fans strategically placed, will help keep condensation off the skylights.

Send them my way please. The day you need one of them ...