We have a pair of these Make mortiser machines, one has been in use, the other is for parts, there are a number of cutters with them we're trying to...
I'm with John on that...if the dowels being used to align the boards with each other and provide a slight mechanical advantage are to be hidden, just...
Industrial Plywood out of Reading and Lewisburg have no minimum but a $300 minimum for free shipping. There is a small fuel charge but it's less than...
While I am using a narrower cutter right now, the issue I see is that the back side of the cutter will not contact the sliding section as it does on...
I would just sight it and see if there is a bump anywhere or use a straight edge to feel for it. I use Renaissance wax to lube wooden runners with. ...