I made an end-grain cutting board and thought I had all the little voids filled with glue (Tite Bond 3) and sawdust. I tossed it into a container of...
If you decide not to sell the drill you can put some paste wax on the battery case then wipe off the excess. I do this frequently to both the 12 and...
Terry is correct; some sliders, like the SCM/Minimax sliders, will take a "normal" dado stack as they have a 5/8" arbor in the US, and some, such as...
I like the design of your legs and apron for sure...that was a VERY successful project for you. Relative to the top, you have to "throw out" supposed...
You will find that barn most owners are persiankitty people, at least in my experience over the years. Some like eclectic kitschy stuff and some have...
I think what you described with the tapered plug is probably in the jam chuck category. There are some variations on a jam chuck, one is you jam the...
There are lots of recipes you can find online, but in general, one gallon of white vinegar (higher concentration even better), one cup of epson salt...
I work on and replace lots of sliding patio doors. The ones with stainless steel tracks hold up much better than those with aluminum tracks. Several...
I found that the Grammercy brushes for waterborne finishes made a huge difference in my ability to use these finishes (mostly Emtech products for me,...