Activity Stream

Ok. How long is the remaining tenon on the end of your front stretcher where it goes into the vise leg? Now that you have trimmed it I mean. I...

Gentlemen, thanks to you all for your kind words. And, Joe, thanks to your wife as well-that's quite a compliment! Best, Chris

Thanks Michael, she is pleased and that was the main idea ;) Best, Chris

A few things come to mind on mailed checks. Almost every online retailer using USPS has a banner warning of delays because of staff and facilities...

John, If you can post some images it might be helpful to show some of your shavings from softer wood to see how thick your shavings are. To help...

Part of the problem with images is you can post them but you can not see them until you pay $6 to become a contributor. No, the bed is the...

looks like an ad or spam mods take notice

Steven does have a point. Likewise I suspect I will have confidence in my glue up skills before this enormous piece of Doug Fir is done...

That is good to know. Mine also don't have stars, but they have the yellow plates on the tools. Thanks for finding this out, it will save me some...

Almost all residential panels I've installed use a conventional breaker that is back fed through to the buss bars. It's still the most common...

Thanks for this post Pete - I, too have the same problem. Three Strongholds of various ages, the oldest is the one that misbehaves with the newer...

I have a different spoke shave than that one, but I often find when I am getting chatter I am taking too much of a cut. You did mention it was...

Oh, i feel your pain. My house was built in 1931. We bought it in 1950, and our apple tree was there when we moved in. That tree meant "home" to...

Rather than fuss with wood, why not just go to a restaurant supply and get something like this? The also make them with pot hangers below the shelf,...

I used a 3D printer to crank out my CNC.

I use Firefox on my android tablet and have no issues viewing all the pages. You might want to give it a try.

I find this useful. It is a Klingspor badged Bosch 1295.

Not sure I would go horizontal with this type arrangement. As others have mentioned, you would need to deal with the particulate that gets past the...

Justin, is your father a woodworker too?

Some panels have a back fed breaker on the branch bus as their main. It has to be mechanically fastened to the panel so it can't be pulled out like...

Kris I seen your local Craigslist ad. Good luck with the sell, if I had that kind of disposable cash, it would be tempting.

I believe full site, not a fan of mobile view

I use a Bosch 3283 DVS sander (I have four of them of which two are still operational) to sand narrow surfaces and I think you should be all right if...

What Jim said. Also, I've ganged multiple small pieces together with some scrap of same thickness at the edges to balance the sander. I've used...

In addition to Mark’s excellent suggestions, which direction is your circ pumping. Is it “to” the close radiant loop to the circ. Perhaps I missed it...

A frog goes into a bank and approaches the teller. He can see from her nameplate that her name is Patty Whack. "Miss Whack, I'd like to get a...

Thanks, John. Is the bed the same as the sole? I did flatten the sole, which I forgot to mention above. How should the screw on the cap iron be...

Matt, I'm very interested in an Avid Pro6060 (don't know if that's proper model number, but I'm looking at a 5'x5' setup). Actually a 5' x axis, 4' Y...