Activity Stream

I am still learning that the fins are very delicate, not much thicker than aluminum foil. A little carelessness has led to a lot of time spent with...

Reed Thank you for your post. What I'm seeking is input on Dave's 3/4" BG, which only comes with the 'U' fluted profile. Is your 3/4" BG...

I just order off Amazon they have the name brand ones and you do not need to drive all over town. Home Depot carries a lot also, zero difference...

I cut tons of latex and have yet to find anything as disgusting and likely to make new enemies. I vent out the window in the dead of night and slide...

I have a pretty simple setup. It sits on an old portable typewriter table from the 1960's Worksharp 3000 is used to hone and occasionally...

Bill Thank you for your post. Your 5/8" D-way may be relevant to my query. Does your 5/8" have a parabolic or U flute profile? I have some...

I'm thinking the turbine is heating the air up enough that it cures faster than it can flow out. Sorry, I know little about thinning. I sold my...

What kind of material is the shoe made of? The Makita shoe is plastic i think.

Looks great! Sad to hear that the school is closing though. I'm a huge fan, met him at LN a bunch of years back and felt like he was a good person to...

Festool, Makita and now Milwaukee use compatible tracks. I "think" Mafeil is also compatible, too. DeWalt has its own design track which is very...

When my AC's fins get to needing cleaned up I turn off the thermostat, pull the breaker out of the box, put a basic jet-spray nozzle on the garden...

I think mine is about the next "Type" newer? Has the "Handi-grip" sides.. With the cap removed....and.. A look under the "hood"

I agree with Mike. You should still have the right and the ability to claim your JC installation. If for no other reason than to troubleshoot...

There is information from the Modorators in an old thread that addresses liability issues on the forum. I think some of the replies were starting to...

"Dozens of people spontaneously combust each year. It's just not really widely reported." -- David St. Hubbins

ls ERCOT considered a political organization by SMC? It is an appointed advisory council, but if deemed political, please delete my references to...

I've never used a track saw, are the tracks different between each brand? Right now I use a regular circular saw with an 8' Lufkin straight edge but...

I think it would carry 3,000 pounds, but there have been situations where the supports have been compromised by rust or rot and the balcony came down...

Made us LOL!

there has been lots of interesting info on threads that meander around. Enough I dont post on on the trade as my views are the same as the old...

Yes. This is why we can't have nice things like interesting threads. Some people can't handle opposing viewpoints.

Sage advice Charles...I love looking at the planes for sale, but I have the ones I need and I am interested in woodworking not tool collecting.

The thread got off topic more than it was uncivil.

I missed this thread previously. One thing I want to mention is that right now in my temporary shop, I have my BenchDog Cast iron router table top...

{rolls eyes} about the nailing...

I believe that's the cost with the Packout, etc. They will be offering the bare tool, too.

Much appreciated, it'll be in the mail tomorrow.

Jealous, My shop is not big enough to roll a 4x8 sheet of anything. Not a problem because I don't do much plywood stuff anymore after converting to...