Activity Stream

and the question is "what is the name of their dog?" :confused:

... and then he leaves the store traveling north at 30 mph to meet his wife who left their house (40 miles away) 10 minutes earlier and is traveling...

This is sold.

Custom furniture is a tough market, because it is easy to transport and fits into most buildings. Cabinets are better, because they get built to fit...

I'll take them. If paypal works and you want to send me a money request, my email is joeerthal@gmail.com. Thanks!

Mine arrived Monday, took about a month from payment to delivery. I saw a few comments like that before ordering, then again, I also work with...

A number of trees are called ironwood. Here in Eastern United States we have two small trees that are sometimes called ironwood 1) Hophornbeam,...

They also make a 19" 21" & 24" bandsaws

I've been enjoying a channel called Shoyan Japanese Carpenter. Lots of power tools but also plenty of hand tool work as well. Very interesting to...

Bill, as much as I'd love to get away from the cold, my oxygen tanks are only good for about two hours & I'm only allowed 12 of them at any one time...

For a given final edge angle, any sort of primary grind is only reducing material behind the edge, which is the purpose. If two 1/8" thick blades...

If you want to get creative, undermount slides can be mounted other than their typical location on the drawer / pullout You may need to shim the...

I think undermounts are your only option. The side mounts still need mounted to the cabinet and you can't do that on their edge, so you would have a...

No, not at all. We plane the high spots and avoid the low spots. If you start with a straight edge and develop a hump by planing, your technique is...

If the sole is flat or very slightly convex you can maintain a flat surface with full length shavings, and not have to do stopped shavings. It takes...

Glad you are okay. The suggestion to review the workpiece is a good one. The piece coming off the fence sounds most likely. Any chance a...

Thanks John, yesterday I ordered some 8/4 QS WO (11 bucks a bd ft. !) due what Richard C. mentioned about tylosis and try using TB 1. My thought is...

This sounds like a high school algebra problem in the making. If Bruce buys 160 pounds of sweet potatoes how many.... Bill D

John, what happened to your table glued with Better Bond? Open seams, or worse? I suspect the glue used on this project is less problematic than...

So for each shelf, you'd have 3/4" for the shelf, 1/2" for the flat sidemount slide, plus something for the slide to rest on. Maybe that's 3/4"...

I remember years ago some advertisers got in trouble because they used tricks like mashed potatoes to make ice cream that did not melt under the...

I am wondering if this relates to the question I just posted in the 'big shooting board' post. Hand planes do not have infeed and outfeed tables. The...

Now is the time to buy those remotes and use them to run a contactor for the dust collector. It is also the time for my annual; buy some clear...

Okay, I am still fairly new to hand planes. They do not have infeed and out feed tables like the mechanical jointers do. I thought this always...

Since you live in Ohio I would think a trip to Mexico would be welcome in winter to get a few months supply. Mexico has tightened up rules on...

Could it have been a build up of chips/dust in the dado that allowed the off side of the bit to get enough friction on "wrong" side of the dado to...

I tried using some CA to seat some 1 by 8 tpi nuts into wood for waste blocks. A day later, stuff was flying out. This was maybe 1/2 inch deep. Now...

That banana car looks like it may have a propellor sticking out the back. Anyone know? Bil lD. edit: it has it's own web page. I do not see any...