Activity Stream

If that is the only compressor you will have, the tank is way too small. I have the smaller version that I use under my workbench for very minor air...

Use it before trying to fix something that may not influence the cut at all.

Here in MO, we can take/send a sample to the county ag agent for testing. You need to take multiple samples in the area of concern, and mix them...

Amazon has testers

Beautiful Bruce! Much detail and design thought put into this one. I like it!! Jim

Sold! .

In TX, we can just send a soil sample to Texas A&M Ag Research Dept - free, except postage - - I think? (I have heard this, but not done it, so...

oh, yes, I forget to mention, the blade is 90 to the table, on the back and on the side. I am not sure how to adjust the column...messed around a...

Thank you Richard Yes the larger saw is Veritas detail flush cutting saw the second saw is a homemade saw: a coping saw blade mounted in a dowel with...

Hi, is the blade at right angles to the table? If so, the column that the guides are attached to is not at right angles to the table. It’s...

Framing nailers need air depending on what you're doing. I bought my first 5hp 2-stage to run a framing nailer with, and kept it in a step van I...

Has to be an extra twist. Maybe pull some up, and milk the rest around smaller. I'll let them do it though.

Hey Chris, I would definitely send it out for sharpening. That’s kind of the beauty of the carbide blades. If you don’t sharpen them, that is a...

do they make a kit for soil PH. There is a simple one for water. Not sure if it can do soil as well. Gardens are done so far for vegetables with...

Right. That also functions as the top tack point for skins in and out. You could tell that they were really slamming these things out. The sticks...

The change in sound level was pretty amazing, Curt. So much so that I'm about to re-lubricate again (one year in) to keep things that way! Garage...

Thank you Mike

According to Evergreen the issues with the Ceramic tubes is they use Epoxy for the connections and they sometimes leak. So recharging without finding...

I gave the Bosch 18v and the 12v a shot side by side. Both are great, but the balance and weight savings on the 12v were impossible to deny. Both are...

And some more photos of the Teardrop. All of the lathe work on the Teardrop was done with carbide cutters. I use this tool brand ...

Okay everyone I had some time today to put together some more photos of this project on the lathe. I did not go into detail on the sphere box for the...

I have a 5/8". Is that close enough?

+1 My BIL is quite the gardener; soils in N.TX are alkaline. To grow hydrangeas or azaleas here, he puts them in raised beds of pure peat moss (to...

I'm happy to say all the planes from batch 2 are now on the way to their owners. Batch 3 will start tomorrow, as many as you now know these could...

My top is roughly like your version 2 without the extension, maybe a few inches larger. It has worked well for me. I find that when work pieces get...

I'm happy to say all the planes from batch 2 are now on the way to their owners. Batch 3 will start tomorrow, as many as you now know these could...