Activity Stream

i was not aware that DeWalt offered a shelix head for that machine. I have seen where certain companies such as Grizzly offer the 735 with a shelix...

EBay Antigue table Example furniture listed on Ebay more than 20 years old

I think the Amish thing with electricity is not to be tied to the grid, their lifestyle is to be self sufficient and using electricity from the grid...

Michael, I like EVERYTHING you make. Would i do somethings differently? Well, maybe, BUT i would have to get off my arse and do it . . . . the...

Kory, Joe Calhoon is THE guy when it comes to shapers. He is also one of the nicest guys you will ever have the pleasure of knowing. Several here...

Unfortunately, on iOS, the only choice is to turn off private relay. I could not access this site with private relay on. On the Mac, you can set it...

If you aren't facing your wide boards on the jointer before thicknessing that could be contributing to the problem. Aside from that, does your planer...

Price drop: $600

I see, that is quite useful... btw, what machine is that? Looks nice. Does it have a sliding table or do you have a bolt on? Either way, why choose...

back to electrical: finally had time to put a 3PH outlet in and rewire the dust collector off of its static phase converter back to a 3PH plug. It...

Regarding the Amish, it all depends on what the bishop allows them to do. Mike

The ogee or bracket patterns on the sides and shelf say Early American and the proud exposed joinery says Arts and Crafts. That is a conflict in my...

I like it. It's a very nice piece. The proud dovetails and tenons remind me of Greene and Greene furniture. If any, my criticisms would be for the...

Put a straightedge from front to back. It could be the beds are not in the same plane.

There is a Village wide Yard Sale to go and check out, this Saturday.....and usually, the village 3 miles away, also has theirs going on...plus, it...

Thanks Kevin. I have Vicmarc and Record Power chucks that use inserts but the tiny Record Power SC2 chuck is direct thread. Most of what I do is on a...

I'm in favor of going for it, & and try not to second guess. Artists often produce dozens of versions in developing a style.

For myself, to show or not show joinery, to add or not add stringing, mouldings or inlay ... all are good. The real factor is how they compliment the...

Get the thread size for the machine you will use it most on and get a high quality adapter for the other lathe. Oneway is a reliable source though...

I am thinking wrong...I am so used to dealing with 3/4" wood, I just have to flip the wood 90 degrees and cut the curve. I don't know why I was...

Cutting a large radius cove tilted to reduce knife projection. if you don’t have a tilt shaper a adjustable angle cutter is a worthwhile tool to...

Richard my tables are very slick. I hold the boards for support. I’ve adjusted feed rollers but I’m thinking I must have issues with them. Not...

Simon I’ll check the chip breaker. I’ve actually never looked at it on this machine. I’m sure it has one. Are they adjustable?

Angle tenons and dovetails using the tilt. sharp angles using tilt in combination with a adjustable angle cutter

Some examples of matching mouldings with existing cutters using a tilt shaft. I generally only do this for 30 or so lineal or less. For larger...

Keep in mind that my experience is limited but here's what I have: 1) I have a supernova 2 that's "OK" I use a stepped set of spigot jaws on this...

Well, in Gaelic scraith refers to turf.

I was thinking about getting a small 4 jaw chuck with a smaller jaw range for tiny projects. I have a beall collet chuck but it has terrible runout...

These look like nail pullers to me. I had to pull the interior panel on my wife's escape rear hatch. It was supposed to have four screws and eight...